SCHNEIDER
Télémécanique photo-electric sensor - XUM - receiver - 15m - 12..24VDC - cable 2m - XUM2APCNL2R
XUM2APCNL2R
obsolete product
Technical informations
Range of product: | Telemecanique Photoelectric sensors XU |
---|---|
Series name: | General purpose single mode |
Electronic sensor type: | Photo-electric sensor receiver |
Sensor name: | XUM |
Sensor design: | Miniature |
Detection system: | Thru beam |
Sensing range: | > 5...15 m |
Material: | Plastic |
Type of output signal: | Discrete |
Supply circuit type: | DC |
Wiring technique: | 3-wire |
Discrete output type: | PNP |
Discrete output function: | 1 NO or 1 NC programmable |
Electrical connection: | Cable |
Cable length: | 2 m |
Product specific application: | - |
Emission: | Red thru beam |
[Sn] nominal sensing distance: | 15 m thru beam need a transmitter XUM2AKCNL2T |
Enclosure material: | PBT |
---|---|
Lens material: | PMMA |
Output type: | Solid state |
Add on input: | Test by emission breaking |
Wire insulation material: | PVC |
Status LED: | 1 LED (red) for indicator light1 LED (green) for instability and supply on |
[Us] rated supply voltage: | 12...24 V DC with reverse polarity protection |
Supply voltage limits: | 10...30 V DC |
Switching capacity in mA: | |
Switching frequency: | |
Maximum voltage drop: | |
Current consumption: | 13 mA no-load |
Maximum delay first up: | 100 ms |
Maximum delay response: | 0.5 ms |
Maximum delay recovery: | 0.5 ms |
Setting-up: | Sensitivity adjustment |
Depth: | 20 mm |
Height: | 34 mm |
Width: | 11 mm |
Product weight: | 0.063 kg |
In short
Reference XUM2APCNL2R
Product Name Télémécanique photo-electric sensor - XUM - receiver - 15m - 12..24VDC - cable 2m - XUM2APCNL2R
Related Categories