SCHNEIDER
Acti9 Smartlink SI B - Modbus TCP/IP and Wireless communication module - A9XMZA08
A9XMZA08
€308.71 Excl. Tax
€370.45 Inc. Tax
Excl. Tax
Excl. Tax
Incl. Tax
Incl. Tax
You save
Supply in process – Average delivery time 4/6 weeks
- Technical support and dedicated single point of contact
- Free delivery from 100€ of purchase (Metropolitan France)
- 100% secure payments
Technical informations
| Range of product: | Acti 9 |
|---|---|
| Range: | Acti 9 |
| Product name: | Acti 9 Smartlink |
| Product or component type: | Smart communication module |
| Device short name: | Smartlink SI B Ethernet |
| Device application: | Basic energy metering EImproved load monitoring E, U, I, P, PfLoad alarmingLoad controlBreaker status monitoring |
| Connected auxiliaries: | Up to 7 wired devicesUp to 20 wireless devices |
| Group of channels: | 1 group of 7 digital channels1 group of 1 analog channel |
| Maximum supply current: | 1.5 A |
| [Us] rated supply voltage: | 24 V DC +/- 20 % |
| Connectivity to devices: | Analog inputDigital input and outputPulse output meterWireless energy sensor |
| Communication service: | Ethernet Modbus TCP/IP serverWeb server |
| Web server: | BMS controller compatibleEmbedded web page |
| Transmission support medium: | Radio frequency 2.4...2.4835 GHz PowerTag 20 |
| Web services: | Web page |
| Application specific I/O: | Pulse converterPulse totalising counter |
|---|---|
| Protection type: | Short-circuit protection for analog inputAgainst reverse polarity for auxiliary supplyAgainst reverse polarity for inputOvervoltage at 33 V DC for digital output |
| Immunity to microbreaks: | 10 ms |
| Reset: | Factory reset on front face |
| Input/output type: | 2 inputs per analog channel2 inputs + 1 output per digital channel |
| Input type: | Current for analog input, 4...20 mAVoltage for analog input, 0...10 V DCCurrent sink for digital input, 24 V DC +/- 20 % at 2.5 mA |
| Maximum permanent current: | 0.005 A for digital input |
| Absolute accuracy error: | +/- 1 % of full scale for analog input 12 bits |
| Electronic filtering time: | 2 ms for digital input from state 0 to state 12 ms for analog input from state 0 to state 1 |
| Output type: | Logic current source: 24 V - DC - 100 mA |
| Maximum voltage drop: | |
| Inrush current: | 0.5 A for digital output3 A for power supply |
| Local signalling: | Communication: 1 LED (yellow)NS (Network Status): 1 LED (green, orange and red)Communication (LK/ACT 10/100): 1 LED (green and yellow)Status: 1 LED (green, orange and red) |
| Mounting position: | Horizontal and vertical on DIN rail |
| Colour: | White (RAL 9003) |
| Location of connection: | Front |
| Connections - terminals: | Spring-loaded terminal Ti24 qty: 7 for digital input/output, ordered separatelyRJ45 connector qty: 1 for ETHERNET, ordered separatelyPlug-in connector qty: 1 for supply circuitPlug-in connector qty: 1 for communication busPlug-in connector qty: 1 for analog input |
| Clamping connection capacity: | 2 x 0.25 mm² for twisted shielded pairs cable, flexible with cable end for communication bus2 x 0.25 mm² for twisted shielded pairs cable, flexible without cable end for communication bus2 x 0.25 mm² for twisted shielded pairs cable, rigid with cable end for communication bus2 x 0.25 mm² for twisted shielded pairs cable, rigid without cable end for communication bus2 x 0.25...2 x 1.5 mm² for twisted shielded pairs cable, rigid with cable end for analog input2 x 0.25...2 x 1.5 mm² for twisted shielded pairs cable, rigid without cable end for analog input2 x 0.25...2 x 1.5 mm² for twisted shielded pairs cable, flexible with cable end for analog input2 x 0.25...2 x 1.5 mm² for twisted shielded pairs cable, flexible without cable end for analog input1 x 0.5...1 x 1.5 mm², flexible with cable end for control1 x 0.5...1 x 1.5 mm², flexible without cable end for control1 x 0.5...1 x 1.5 mm², rigid with cable end for control1 x 0.5...1 x 1.5 mm², rigid without cable end for control2 x 0.2...2 x 1.5 mm², flexible with cable end for supply circuit2 x 0.2...2 x 1.5 mm², flexible without cable end for supply circuit2 x 0.2...2 x 1.5 mm², rigid with cable end for supply circuit2 x 0.2...2 x 1.5 mm², rigid without cable end for supply circuit |
| Wire stripping length: | Control: 10 mmSupply circuit: 7 mmAnalog input: 7 mmCommunication bus: 7 mm |
| Communication network type: | RS485 Modbus RTU master SUB-D 9 9.6...19.2 kbaudsEthernet Modbus TCP/IP server RJ45 10/100 Mbit/s |
| 9 mm pitches: | 0 useful |
| Height: | 22.5 mm |
| Width: | 359 mm |
| Depth: | 42 mm |
| Product weight: | 180 g |
| Provided equipment: | Set of 1 connectorSet of 1 bus connectorSet of 1 power supply connectorSet of 2 locking clips |
| Range compatibility: | iTL auxiliaryC60Linergy FM iOF+SD 24 iACT24 iATL24 pulse output meter Modbus meterPowerTag wireless energy sensor RCA iC60Acti 9 iCT auxiliaryActi 9 iC60Acti 9 iIDActi 9 iSW-NAActi 9 iDPN VigiActi 9 C40Acti 9 DT40Acti 9 DT60Acti 9 I-NAActi 9 ITG40Acti 9 iDPNActi 9 Reflex iC60 Ti24 connector |
| Commissioning interface: | ECOREACHWeb page |
| Compatibility code: | Acti 9 Smartlink IP |
In short
Reference A9XMZA08
Product Name Acti9 Smartlink SI B - Modbus TCP/IP and Wireless communication module - A9XMZA08
Range Acti 9
