9,3/10 van 1126 beoordelingen
SCHNEIDER

Altistart 22 Softstarter voor asynchrone motor - 75 A - 230-440V - 18.5-75 kW - ATS22D75Q

ATS22D75Q

€ 976,01 Excl. BTW
€ 1.171,21 Incl. BTW
available Op voorraad – Binnen 24/48 uur verzonden
  • check2 Technische ondersteuning en persoonlijk aanspreekpunt
  • check2 Betalingen 100% veilig maestro mastercard paypal visa payplug fintecture alma
Technische informatie
Range of product: Altistart 22
Product or component type: Soft starter
Bestemming product: Asynchrone motoren
Productspecifieke toepassing: Pumps and fans
Naam component: ATS22
Aantal fasen in netwerk: 3 fases
Us nominale voedingsspanning: 230...440 V - 15...10 %
Motorvermogen kW: 37 kW 400 V37 kW 440 V18,5 kW 230 V
Fabrieksinstelling stroom: 69 A
Vermogensdissipatie in W: 63 W voorstandaardtoepassingen
Utilisation category: AC-53A
Starttype: Start met koppelbeheersing (stroom beperkt tot 3.5 In)
IcL starterklasse: 75 A voor aansluiting op de voedingslijn van de motor voorstandaardtoepassingen
IP beschermingsgraad: IP20
Montage stijl: Met koelplaat
Beschikbarefunctie: Interne bypass
Voedingsspanningsgrenzen: 195...484 V
Voedingsfrequentie: 50...60 Hz - 10...10 %
Network frequency: 45...66 Hz
Aansluiting apparaat: Op de voedingslijn van de motorOp de delta-terminals van de motor
Spanning stuurkring: 230 V - 15...10 % 50/60 Hz
Verbruik stuurkring: 20 W
Aantal digitale uitgangen: 2
Discreet uitgangstype: Relais outputs R1 230 V in werking, alarm, trip, gestopt, niet gestopt, starten, gereed C/ORelais outputs R2 230 V in werking, alarm, trip, gestopt, niet gestopt, starten, gereed C/O
Minimale schakelstroom: 100 mA bij 12 V DC (relais outputs)
Maximale schakelstroom: 5 A 250 V AC resistief 1 relaisoutputs5 A 30 V DC resistief 1 relaisoutputs2 A 250 V AC inductief 0,4 20 ms relaisoutputs2 A 30 V DC inductief 7 ms relaisoutputs
Aantal digitale ingangen: 3
Discreet inputtype: (LI1, LI2, LI3) logisch, 5 mA 4.3 kOhm
Discrete ingangsspanning: 24 V
Discrete inputlogica: Positieve logica LI1, LI2, LI3 bij Status 0: 11 V, >= 5 mA
Uitgangsstroom: 0,4...1 Icl aanpasbaar
PTC ingang sonde: 750 Ohm
Protocol communicatiepoort: Modbus
Type connector: 1 RJ45
Datacommunicatieverbinding: Serieel
Fysieke interface: RS485 multidrop
Transmissiesnelheid: 4800, 9600 of 19200 bps
Geïnstalleerd apparaat: 31
Type bescherming: Fase-uitval: lijnThermische beveiliging: motorThermische beveiliging: starter
Markering: CE
Type koeling: Geforceerde convectie
Werkingspositie: Vertikaal +/- 10 graden
Height: 295 mm
Width: 145 mm
Depth: 207 mm
Gewicht product: 12 kg
Stroombereik: 15...25 kW bij 200...240 V 3 fases30...50 kW bij 380...440 V 3 fases
Type motorstarter: Soft starter
In het kort
Referentie ATS22D75Q
Naam product Altistart 22 Softstarter voor asynchrone motor - 75 A - 230-440V - 18.5-75 kW - ATS22D75Q
Verwante categorieën