SCHNEIDER
photo-electric sensor - XUM - receiver - 15m - 12..24VDC - cable 2m - XUM2APCNL2R
XUM2APCNL2R
obsolete product
Technical informations
| Range of product: | Telemecanique Photoelectric sensors XU |
|---|---|
| Series name: | General purpose single mode |
| Electronic sensor type: | Photo-electric sensor receiver |
| Sensor name: | XUM |
| Sensor design: | Miniature |
| Detection system: | Thru beam |
| Sensing range: | > 5...15 m |
| Material: | Plastic |
| Type of output signal: | Discrete |
| Supply circuit type: | DC |
| Wiring technique: | 3-wire |
| Discrete output type: | PNP |
| Discrete output function: | 1 NO or 1 NC programmable |
| Electrical connection: | Cable |
| Cable length: | 2 m |
| Product specific application: | - |
| Emission: | Red thru beam |
| [Sn] nominal sensing distance: | 15 m thru beam need a transmitter XUM2AKCNL2T |
| Enclosure material: | PBT |
|---|---|
| Lens material: | PMMA |
| Output type: | Solid state |
| Add on input: | Test by emission breaking |
| Wire insulation material: | PVC |
| Status LED: | 1 LED (red) for indicator light1 LED (green) for instability and supply on |
| [Us] rated supply voltage: | 12...24 V DC with reverse polarity protection |
| Supply voltage limits: | 10...30 V DC |
| Switching capacity in mA: | |
| Switching frequency: | |
| Maximum voltage drop: | |
| Current consumption: | 13 mA no-load |
| Maximum delay first up: | 100 ms |
| Maximum delay response: | 0.5 ms |
| Maximum delay recovery: | 0.5 ms |
| Setting-up: | Sensitivity adjustment |
| Depth: | 20 mm |
| Height: | 34 mm |
| Width: | 11 mm |
| Product weight: | 0.063 kg |
In short
Reference XUM2APCNL2R
Product Name photo-electric sensor - XUM - receiver - 15m - 12..24VDC - cable 2m - XUM2APCNL2R
Related Categories