SCHNEIDER
controller M241 40 IO transistor PNP - TM241C40T
TM241C40T
€648.22 Excl. Tax
€777.86 Inc. Tax
Excl. Tax
Excl. Tax
Incl. Tax
Incl. Tax
You save
Supply in process – Average delivery time 4/6 weeks
- Technical support and dedicated single point of contact
- Free delivery from 100€ of purchase (Metropolitan France)
- 100% secure payments
Technical informations
| Range of product: | Modicon M241 |
|---|---|
| Product or component type: | Logic controller |
| [Us] rated supply voltage: | 24 V DC |
| Discrete input number: | 24, discrete input 8 fast input conforming to IEC 61131-2 Type 1 |
| Discrete output type: | Transistor |
| Discrete output number: | 16 transistor 4 fast output |
| Discrete output voltage: | 24 V DC for transistor output |
| Discrete output current: | 0.1 A for fast output (PTO mode) (Q0...Q3)0.5 A for transistor output (Q0...Q15) |
| Discrete I/O number: | 40 |
|---|---|
| Maximum number of I/O expansion module: | 7 (local I/O-Architecture)14 (remote I/O-Architecture) |
| Supply voltage limits: | 20.4...28.8 V |
| Inrush current: | 50 A |
| Power consumption in W: | 32.6...40.4 W (with max number of I/O expansion module) |
| Discrete input logic: | Sink or source |
| Discrete input voltage: | 24 V |
| Discrete input voltage type: | DC |
| Voltage state 1 guaranteed: | >= 15 V for input |
| Voltage state 0 guaranteed: | |
| Discrete input current: | 10.7 mA for fast input7 mA for input |
| Input impedance: | 4.7 kOhm for input2.81 kOhm for fast input |
| Response time: | 50 µs turn-on, I0...I15 terminal(s) for input50 µs turn-off, I0...I15 terminal(s) for input |
| Configurable filtering time: | 1 µs for fast input12 ms for fast input0 ms for input1 ms for input4 ms for input12 ms for input |
| Discrete output logic: | Positive logic (source) |
| Output voltage limits: | 30 V DC |
| Maximum current per output common: | 2 A |
| Maximum output frequency: | 20 kHz for fast output (PWM mode)100 kHz for fast output (PLS mode)1 kHz for output |
| Accuracy: | +/- 0.1 % at 0.02...0.1 kHz for fast output+/- 1 % at 0.1...1 kHz for fast output |
| Maximum leakage current: | 5 µA for output |
| Maximum voltage drop: | |
| Maximum tungsten load: | |
| Protection type: | Short-circuit protectionShort-circuit and overload protection with automatic resetReverse polarity protection for fast output |
| Reset time: | 10 ms automatic reset output12 s automatic reset fast output |
| Memory capacity: | 8 MB for program64 MB for system memory RAM |
| Data backed up: | 128 MB built-in flash memory for backup of user programs |
| Data storage equipment: | |
| Battery type: | BR2032 lithium non-rechargeable, battery life: 4 year(s) |
| Backup time: | 2 years at 25 °C |
| Execution time for 1 KInstruction: | 0.3 ms for event and periodic task0.7 ms for other instruction |
| Application structure: | 8 event tasks8 external event tasks4 cyclic master tasks3 cyclic master tasks + 1 freewheeling task |
| Realtime clock: | With |
| Clock drift: | |
| Positioning functions: | PTO function 4 channel(s) (positioning frequency: 100 kHz)PTO function 4 channel(s) for transistor output (positioning frequency: 1 kHz) |
| Counting input number: | 4 fast input (HSC mode) at 200 kHz16 standard input at 1 kHz |
| Control signal type: | A/B at 100 kHz for fast input (HSC mode)Pulse/direction at 200 kHz for fast input (HSC mode)Single phase at 200 kHz for fast input (HSC mode) |
| Integrated connection type: | Non isolated serial link serial 1 with RJ45 connector and RS232/RS485 interface Non isolated serial link serial 2 with removable screw terminal block connector and RS485 interface USB port with mini B USB 2.0 connector |
| Supply: | (serial 1)serial link supply: 5 V, |
| Transmission rate: | 1.2...115.2 kbit/s (115.2 kbit/s by default) for bus length of 15 m for RS4851.2...115.2 kbit/s (115.2 kbit/s by default) for bus length of 3 m for RS232480 Mbit/s for bus length of 3 m for USB |
| Communication port protocol: | Non isolated serial link: Modbus master/slave |
| Local signalling: | 1 LED (green) for PWR1 LED (green) for RUN1 LED (red) for module error (ERR)1 LED (red) for I/O error (I/O)1 LED (green) for SD card access (SD)1 LED (red) for BAT1 LED (green) for SL11 LED (green) for SL21 LED (red) for bus fault on TM4 (TM4)1 LED per channel (green) for I/O state |
| Electrical connection: | removable screw terminal blockfor inputs and outputs (pitch 5.08 mm) removable screw terminal blockfor connecting the 24 V DC power supply (pitch 5.08 mm) |
| Maximum cable distance between devices: | Unshielded cable: Shielded cable: Unshielded cable: Shielded cable: |
| Insulation: | Between supply and internal logic at 500 V ACNon-insulated between supply and groundBetween input and internal logic at 500 V ACNon-insulated between inputsBetween fast input and internal logic at 500 V ACBetween output and internal logic at 500 V ACNon-insulated between outputsBetween fast output and internal logic at 500 V ACBetween output groups at 500 V AC |
| Marking: | CE |
| Surge withstand: | 1 kV power lines (DC) common mode conforming to EN/IEC 61000-4-51 kV shielded cable common mode conforming to EN/IEC 61000-4-50.5 kV power lines (DC) differential mode conforming to EN/IEC 61000-4-51 kV relay output differential mode conforming to EN/IEC 61000-4-51 kV input common mode conforming to EN/IEC 61000-4-51 kV transistor output common mode conforming to EN/IEC 61000-4-5 |
| Mounting support: | Top hat type TH35-15 rail conforming to IEC 60715Top hat type TH35-7.5 rail conforming to IEC 60715 plate or panel with fixing kit |
| Height: | 90 mm |
| Depth: | 95 mm |
| Width: | 190 mm |
| Product weight: | 0.62 kg |
In short
Reference TM241C40T
Product Name controller M241 40 IO transistor PNP - TM241C40T
Related Categories
