SCHNEIDER
TeSys K changeover contactor - 4P - AC-1 <= 440 V 20 A - 220 V DC coil - LP2K09004MD
LP2K09004MD
This product is no longer available. Contact us for a suitable replacement solution tailored to your needs.
Technical informations
| Range of product: | TeSys K |
|---|---|
| Range: | TeSys |
| Product name: | TeSys K |
| Product or component type: | Changeover contactor |
| Device short name: | LP2K |
| Device application: | Control |
| Contactor application: | Resistive load |
| Utilisation category: | AC-1 |
| Device presentation: | Preassembled with reversing power busbar |
| Poles description: | 4P |
| Pole contact composition: | 4 NO |
| [Ue] rated operational voltage: | Power circuit: 690 V AC 50/60 Hz |
| [Ie] rated operational current: | 20Â A (at 16Â A (at |
| Control circuit type: | DC standard |
| [Uc] control circuit voltage: | 220 V DC |
| [Uimp] rated impulse withstand voltage: | 8Â kV |
| Overvoltage category: | III |
| [Ith] conventional free air thermal current: | 20 A (at 50 °C) for power circuit |
| Irms rated making capacity: | 110Â A AC for power circuit conforming to NF C 63-110110Â A AC for power circuit conforming to IEC 60947 |
| Rated breaking capacity: | 110Â A at 415 V conforming to IEC 60947110Â A at 440 V conforming to IEC 6094780Â A at 500 V conforming to IEC 60947110Â A at 220...230 V conforming to IEC 60947110Â A at 380...400 V conforming to IEC 6094770Â A at 660...690 V conforming to IEC 60947 |
| [Icw] rated short-time withstand current: | 90 A 50 °C - 1 s for power circuit85 A 50 °C - 5 s for power circuit80 A 50 °C - 10 s for power circuit60 A 50 °C - 30 s for power circuit45 A 50 °C - 1 min for power circuit40 A 50 °C - 3 min for power circuit20 A 50 °C - >= 15 min for power circuit |
| Associated fuse rating: | 25Â A gG at 25Â A aM for power circuit |
| Average impedance: | 3Â mOhm - Ith 20Â A 50 Hz for power circuit |
| [Ui] rated insulation voltage: | Power circuit: 600Â V conforming to UL 508Power circuit: 690Â V conforming to IEC 60947-4-1Power circuit: 600Â V conforming to CSA C22.2 No 14 |
| Electrical durability: | 0.18Â Mcycles 20Â A AC-1 at Ue |
| Interlocking type: | Mechanical |
| Mounting support: | RailPlate |
| Standards: | NF C 63-110VDE 0660IEC 60947BS 5424 |
| Product certifications: | ULCSA |
| Connections - terminals: | Screw clamp terminals 1 cable(s) 1.5...4 mm²solidScrew clamp terminals 1 cable(s) 0.75...4 mm²flexible without cable endScrew clamp terminals 1 cable(s) 0.34...2.5 mm²flexible with cable endScrew clamp terminals 2 cable(s) 1.5...4 mm²solidScrew clamp terminals 2 cable(s) 0.75...4 mm²flexible without cable endScrew clamp terminals 2 cable(s) 0.34...1.5 mm²flexible with cable end |
| Tightening torque: | 1.3 N.m - on screw clamp terminals - with screwdriver Philips No 21.3 N.m - on screw clamp terminals - with screwdriver flat Ø 6 mm |
| Operating time: | 30...40 ms coil energisation and NO closing10 ms coil de-energisation and NO opening |
| Safety reliability level: | B10d = 1369863Â cycles contactor with nominal load conforming to EN/ISO 13849-1B10d = 20000000Â cycles contactor with mechanical load conforming to EN/ISO 13849-1 |
| Mechanical durability: | 5Â Mcycles |
| Maximum operating rate: | 3600Â cyc/h |
| Control circuit voltage limits: | Operational: 0.8...1.15 Uc (at Drop-out: 0.1...0.75 Uc (at |
|---|---|
| Inrush power in W: | 3 W (at 20 °C) |
| Hold-in power consumption in W: | 3 W at 20 °C |
| Heat dissipation: | 3Â W |
| Compatibility code: | LP2K |
In short
Reference LP2K09004MD
Product Name TeSys K changeover contactor - 4P - AC-1 <= 440 V 20 A - 220 V DC coil - LP2K09004MD
Range TeSys
Device function Contrôle
Our customers also bought
Related Categories