SCHNEIDER

Power base, TeSys U, 3P, 12A/690V, TQ 10 - LUB12TQ

LUB12TQ

This product is no longer available. Contact us for a suitable replacement solution tailored to your needs.

In short
Compatible with
Features
Details
Infos
Return
We recommend

Technical informations

Range of product:	TeSys U
Range:	TeSys
Product name:	TeSys U
Device short name:	LUB
Product or component type:	Non reversing power base
Device application:	Motor controlMotor protection
Poles description:	3P
Suitability for isolation:	Yes
[Ue] rated operational voltage:	690 V AC for power circuit
Network frequency:	40...60 Hz
[Ith] conventional free air thermal current:	12 A
[Ie] rated operational current:	12 A at 12 A at 500 V9 A at 690 V
Utilisation category:	AC-43AC-44AC-41
[Ics] rated service breaking capacity:	50 kA at 230 V50 kA at 440 V10 kA at 500 V4 kA at 690 V
Auxiliary contact composition:	1 NO + 1 NC
Auxiliary contacts type:	type linked contacts (1 NO + 1 NC) conforming to IEC 60947-4-1 type mirror contact (1 NC) conforming to IEC 60947-1
[Uc] control circuit voltage:	24 V AC 50/60 Hz24 V DC48...72 V AC 50/60 Hz48...72 V DC110...240 V AC 50/60 Hz110...220 V DC

Typical current consumption:	130 mA at 24 V DC I maximum while closing with LUCA, LUCB, LUCC, LUCD140 mA at 24 V AC I maximum while closing with LUCA, LUCB, LUCC, LUCD150 mA at 24 V DC I maximum while closing with LUCM280 mA at 110...220 V DC I maximum while closing with LUCA, LUCB, LUCC, LUCD280 mA at 110...240 V AC I maximum while closing with LUCA, LUCB, LUCC, LUCD280 mA at 48...72 V AC I maximum while closing with LUCA, LUCB, LUCC, LUCD280 mA at 48...72 V DC I maximum while closing with LUCA, LUCB, LUCC, LUCD35 mA at 110...220 V DC I rms sealed with LUCA, LUCB, LUCC, LUCD35 mA at 110...240 V AC I rms sealed with LUCA, LUCB, LUCC, LUCD35 mA at 48...72 V AC I rms sealed with LUCA, LUCB, LUCC, LUCD35 mA at 48...72 V DC I rms sealed with LUCA, LUCB, LUCC, LUCD60 mA at 24 V DC I rms sealed with LUCA, LUCB, LUCC, LUCD70 mA at 24 V AC I rms sealed with LUCA, LUCB, LUCC, LUCD70 mA at 24 V DC I rms sealed with LUCM
Heat dissipation:	2 W for control circuit with LUCA, LUCB, LUCC, LUCD1.7 W for control circuit with LUCM
Safety reliability level:	B10d = 1369863 cycles contactor with nominal load conforming to EN/ISO 13849-1B10d = 20000000 cycles contactor with mechanical load conforming to EN/ISO 13849-1
Operating time:	35 ms opening with LUCA, LUCB, LUCC, LUCD, LUCM for control circuit50 ms at >= 72 V closing with LUCA, LUCB, LUCC, LUCD for control circuit60 ms at 48 V closing with LUCA, LUCB, LUCC, LUCD for control circuit70 ms at 24 V closing with LUCA, LUCB, LUCC, LUCD for control circuit75 ms closing with LUCM for control circuit
Mechanical durability:	15 Mcycles
Maximum operating rate:	3600 cyc/h
Product certifications:	CEULCSACCCEACASEFAATEXMarine
Standards:	EN 60947-6-2IEC 60947-6-2UL 60947-4-1, with phase barrierCSA C22.2 No 60947-4-1, with phase barrier
[Ui] rated insulation voltage:	690 V conforming to IEC 60947-6-2 (pollution degree 3)600 V conforming to UL 60947-4-1600 V conforming to CSA C22.2 No 60947-4-1
[Uimp] rated impulse withstand voltage:	6 kV conforming to IEC 60947-6-2
Safe separation of circuit:	400 V SELV between the control and auxiliary circuits conforming to IEC 60947-1 appendix N400 V SELV between the control or auxiliary circuit and the main circuit conforming to IEC 60947-1 appendix N
Fixing mode:	Clipped (DIN rail)Screw-fixed (plate)
Connections - terminals:	Control circuit: screw clamp terminals 1 cable(s) 0.34...1.5 mm² flexible with cable endControl circuit: screw clamp terminals 1 cable(s) 0.75...1.5 mm² flexible without cable endControl circuit: screw clamp terminals 1 cable(s) 0.75...1.5 mm² rigidControl circuit: screw clamp terminals 2 cable(s) 0.34...1.5 mm² flexible with cable endControl circuit: screw clamp terminals 2 cable(s) 0.75...1.5 mm² flexible without cable endControl circuit: screw clamp terminals 2 cable(s) 0.75...1.5 mm² rigidPower circuit: screw clamp terminals 1 cable(s) 1...10 mm² rigidPower circuit: screw clamp terminals 1 cable(s) 1...6 mm² flexible with cable endPower circuit: screw clamp terminals 1 cable(s) 2.5...10 mm² flexible without cable endPower circuit: screw clamp terminals 2 cable(s) 1...6 mm² flexible with cable endPower circuit: screw clamp terminals 2 cable(s) 1...6 mm² rigidPower circuit: screw clamp terminals 2 cable(s) 1.5...6 mm² flexible without cable end
Tightening torque:	Control circuit: 0.8...1.2 N.m flat screwdriver 5 mmControl circuit: 0.8...1.2 N.m Philips no 1 screwdriver 5 mmPower circuit: 1.9...2.5 N.m flat screwdriver 6 mmPower circuit: 1.9...2.5 N.m Philips No 2 screwdriver 6 mm
Width:	45 mm
Height:	154 mm
Depth:	126 mm
Product weight:	0.9 kg
Quantity per set:	Set of 10
Compatibility code:	LUB

IP degree of protection:	IP20 conforming to IEC 60947-1 (front panel and wired terminals)IP20 conforming to IEC 60947-1 (other faces)IP40 conforming to IEC 60947-1 (front panel outside connection zone)
Protective treatment:	TH conforming to IEC 60068
Ambient air temperature for operation:	-25...60 °C with LUCM-25...70 °C with LUCA, LUCB, LUCC, LUCD
Ambient air temperature for storage:	-40...85 °C
Fire resistance:	960 °C parts supporting live components conforming to IEC 60695-2-12650 °C conforming to IEC 60695-2-12
Operating altitude:	2000 m
Shock resistance:	10 gn power poles open conforming to IEC 60068-2-2715 gn power poles closed conforming to IEC 60068-2-27
Vibration resistance:	2 gn (f= 5...300 Hz) power poles open conforming to IEC 60068-2-274 gn (f= 5...300 Hz) power poles closed conforming to IEC 60068-2-27
Resistance to electrostatic discharge:	8 kV level 3 in open air conforming to IEC 61000-4-28 kV level 4 on contact conforming to IEC 61000-4-2
Resistance to radiated fields:	10 V/m 3 conforming to IEC 61000-4-3
Resistance to fast transients:	2 kV class 3 serial link conforming to IEC 61000-4-44 kV class 4 all circuits except for serial link conforming to IEC 61000-4-4
Non-dissipating shock wave:	1 kV serial mode 24...240 V AC conforming to IEC 60947-6-21 kV serial mode 48...220 V DC conforming to IEC 60947-6-22 kV common mode 24...240 V AC conforming to IEC 60947-6-22 kV common mode 48...220 V DC conforming to IEC 60947-6-2
Immunity to radioelectric fields:	10 V conforming to IEC 61000-4-6
Immunity to microbreaks:	3 ms for control circuit
Immunity to voltage dips:	70 % / 500 ms conforming to IEC 61000-4-11
Sustainable offer status:	Green Premium productEU RoHS Directive