SCHNEIDER
TeSys LC1D - Contactor - 4P - AC-3 440V - 80A - 230V AC Coil - LC1DT80AP7
LC1DT80AP7
€209.99 Excl. Tax
€251.99 Inc. Tax
Excl. Tax
Excl. Tax
Incl. Tax
Incl. Tax
You save
In stock more than 25 units – Dispatched within 24/48h
- Technical support and dedicated single point of contact
- Free delivery from 250€ of purchase (Metropolitan France)
- 100% secure payments
Technical informations
| Compatibility code: | LC1D |
|---|---|
| Power pole contact composition: | 4 NO |
| Frequency: | With |
| [Ith] Conventional thermal current: | 10 A (at 60 °C) for signaling circuit, 80 A (at 60 °C) for power circuit |
| Rated making and breaking capacity Irms: | 140 A AC for signaling circuit conforming to IEC 60947-5-1, 250 A DC for signaling circuit conforming to IEC 60947-5-1, 1000 A at 440 V for power circuit conforming to IEC 60947 |
| Rated breaking capacity: | 1000 A at 440 V for power circuit conforming to IEC 60947 |
| [Icw] Rated short-time withstand current: | 640 A 40 °C - 10 s for power circuit, 900 A 40 °C - 1 s for power circuit, 110 A 40 °C - 10 min for power circuit, 260 A 40 °C - 1 min for power circuit, 100 A - 1 s for signaling circuit, 120 A - 500 ms for signaling circuit, 140 A - 100 ms for signaling circuit |
| Associated fuse rating: | 10 A gG for signaling circuit conforming to IEC 60947-5-1, 125 A gG at |
| Average impedance: | 1,6 mOhm - Ith 80 A 50 Hz for power circuit |
| Power dissipation per pole: | 10,2 W AC-1 |
| [Ui] Rated insulation voltage: | Power circuit 600 V CSA certified, Power circuit 600 V UL certified, Signaling circuit 690 V conforming to IEC 60947-1, Signaling circuit 600 V CSA certified, Signaling circuit 600 V UL certified, Power circuit 690 V conforming to IEC 60947-4-1 |
| Overvoltage category: | III |
| Pollution degree: | 3 |
| [Uimp] Rated impulse withstand voltage: | 6 kV conforming to IEC 60947 |
| Safety reliability level: | B10d = 1369863 cycles contactor with rated load conforming to EN/ISO 13849-1, B10d = 20000000 cycles contactor with mechanical load conforming to EN/ISO 13849-1 |
| Mechanical lifespan: | 6 Mcycles |
| Electrical lifespan: | 1,4 Mcycles 80 A AC-1 at Ue |
| Control circuit type: | AC 50/60 Hz |
| Coil technology: | Without integrated suppression module |
| Control voltage range: | 0,3...0,6 Uc (-40?70 °C) |
| Call power in VA: | 140 VA 60 Hz cos phi 0,75 (at 20 °C), 160 VA 50 Hz cos phi 0,75 (at 20 °C) |
| Average holding power in VA: | 13 VA 60 Hz cos phi 0,3 (at 20 °C), 15 VA 50 Hz cos phi 0,3 (at 20 °C) |
| Thermal dissipation: | 4?5 W at 50/60 Hz |
| Operating time: | 4...19 ms opening, 12...26 ms closing |
| Maximum operating speed: | 3600 cyc/h at 60 °C |
| Connection mode: | Control circuit terminal block 2 1?2,5 mm² - cable stiffness flexible with ferrule, Control circuit terminal block 1 1?4 mm² - cable stiffness flexible without ferrule, Control circuit terminal block 2 1?4 mm² - cable stiffness flexible without ferrule, Control circuit terminal block 1 1?4 mm² - cable stiffness flexible with ferrule, Control circuit terminal block 1 1?4 mm² - cable stiffness rigid without ferrule, Control circuit terminal block 2 1?4 mm² - cable stiffness rigid without ferrule, Power circuit BTR EverLink screw connectors 1 1?35 mm² - cable stiffness flexible without ferrule, Power circuit BTR EverLink screw connectors 2 1?25 mm² - cable stiffness flexible without ferrule, Power circuit BTR EverLink screw connectors 1 1?35 mm² - cable stiffness flexible with ferrule, Power circuit BTR EverLink screw connectors 2 1?25 mm² - cable stiffness flexible with ferrule, Power circuit BTR EverLink screw connectors 1 1?35 mm² - cable stiffness rigid without ferrule, Power circuit BTR EverLink screw connectors 2 1?25 mm² - cable stiffness rigid without ferrule |
| Tightening torque: | Control circuit 1,7 N.m - on terminal block - with flat screwdriver Ø 6 mm, Control circuit 1,7 N.m - on terminal block - with Philips screwdriver No 2, Power circuit 8 N.m - on terminal block - cable 25?35 mm² hex head screw 4 mm, Power circuit 5 N.m - on terminal block - cable 1?25 mm² hex head screw 4 mm, Control circuit 1,7 N.m - on terminal block - with Pozidriv screwdriver No 2, Power circuit 2,5 N.m - on terminal block - with Pozidriv screwdriver No 2 |
| Auxiliary contact composition: | 1 NO + 1 NC |
| Type of auxiliary contacts: | mechanically linked type 1 NO + 1 NC conforming to IEC 60947-5-1, mirror contact type 1 NC conforming to IEC 60947-4-1 |
| Signaling circuit frequency: | 25...400 Hz |
| Minimum switching voltage: | 17 V for signaling circuit |
| Minimum switching current: | 5 mA for signaling circuit |
| Insulation resistance: | > 10 MOhm for signaling circuit |
| Non-overlap time: | 1,5 ms on de-energization between NC and NO, 1,5 ms on energization between NC and NO |
| Mounting support: | Rail, Plate |
| Range: | TeSys, TeSys Deca |
|---|---|
| Product range: | TeSys Deca |
| Product type or equipment: | Contactor |
| Device name: | LC1D |
| Contactor application: | Resistive load |
| Utilization category: | AC-1 |
| Poles description: | 4P |
| [Ue] Rated operational voltage: | Power circuit |
| [Ie] Rated operational current: | 80 A (at |
| [Uc] Control circuit voltage: | 230 V AC 5 |
In short
Reference LC1DT80AP7
Product Name TeSys LC1D - Contactor - 4P - AC-3 440V - 80A - 230V AC Coil - LC1DT80AP7
Range TeSys
Our customers also bought
Related Categories
