SCHNEIDER
motor voltage and temperature control relay - RM35-T - 24..240 V AC/DC - 2 NO - RM35TM250MW
RM35TM250MW
€176.26 Excl. Tax
€211.51 Inc. Tax
Excl. Tax
Excl. Tax
Incl. Tax
Incl. Tax
You save
In stock more than 25 units – Dispatched within 24/48h
- Technical support and dedicated single point of contact
- Free delivery from 100€ of purchase (Metropolitan France)
- 100% secure payments
Technical informations
| Range of product: | Harmony Control Relays |
|---|---|
| Product or component type: | 3-phase control relay |
| Relay type: | Motor temperature control relay |
| Product specific application: | For 3-phase supply |
| Relay name: | RM35TM |
| Relay monitored parameters: | Phase failure detectionPhase sequenceTest/reset buttonMotor temperature via PTC probeSelection (with or without memory) |
| Time delay type: | Fixed 0.3 s |
| Switching capacity in VA: | 1250 VA |
| Measurement range: | 208...480 V voltage AC0...20 Ohm short-circuit detection |
| Contacts type and composition: | 2 NO |
| Connections - terminals: | Screw connectors |
| [Uc] control circuit voltage: | 24...240 V |
| [In] rated current: | 5 A |
| Reset time: | 10000 ms output |
|---|---|
| Maximum switching voltage: | 250 V AC250 V DC |
| Minimum switching current: | 10 mA at 5 V DC |
| Maximum switching current: | 5 A AC5 A DC |
| Supply voltage limits: | 20.4...264 V AC20.4...264 V DC |
| Power consumption in VA: | 0...4 VA at 24...240 V AC |
| Maximum power consumption in W: | 0.5 W DC |
| Control circuit frequency: | 50...60 Hz +/- 10 % |
| Resistance across terminals: | 602 mOhm |
| Output contacts: | 2 NO |
| Nominal output current: | 5 A |
| Measurement voltage limits: | 176...528 V AC |
| Run-up delay at power-up: | 500 ms |
| Voltage range: | 176...528 V |
| Response time: | > 50 ms (input Y1 (contact Y1-T1) and push-button) |
| [Uc] control circuit voltage: | |
| Short-circuit current: | 0.007 A temperature sensing circuit (T1-T2 terminals short circuited) |
| Maximum resistance: | 1500 Ohm for temperature sensor at 20 °C |
| Tripping threshold: | 3100 Ohm +/- 10 % for temperature control circuit |
| Reset threshold: | 1650 Ohm +/- 10 % for temperature control circuit |
| Marking: | CE |
| Overvoltage category: | III conforming to IEC 60664-1 |
| Insulation resistance: | > 500 MOhm at 500 V DC between supply and relay output conforming to IEC 60255-5> 500 MOhm at 500 V DC between measurement and relay output conforming to IEC 60664-1> 1 MOhm at 500 V DC between supply and measurement conforming to IEC 60255-5> 500 MOhm at 500 V DC between supply and relay output conforming to IEC 60664-1> 500 MOhm at 500 V DC between measurement and relay output conforming to IEC 60255-5> 1 MOhm at 500 V DC between supply and measurement conforming to IEC 60664-1 |
| [Ui] rated insulation voltage: | 400 V conforming to IEC 60664-1 |
| Supply frequency: | 50/60 Hz +/- 10 % |
| Operating position: | Any position without derating |
| Connections - terminals: | Screw terminals, 1 x 0.5...1 x 4 mm² (AWG 20...AWG 11) solid without cable endScrew terminals, 2 x 0.5...2 x 2.5 mm² (AWG 20...AWG 14) solid without cable endScrew terminals, 1 x 0.2...1 x 2.5 mm² (AWG 24...AWG 12) flexible with cable endScrew terminals, 2 x 0.2...2 x 1.5 mm² (AWG 24...AWG 16) flexible with cable end |
| Tightening torque: | 0.6...1 N.m conforming to IEC 60947-1 |
| Housing material: | Self-extinguishing plastic |
| Local signalling: | LED (green) for power ONLED (yellow) for phase of relay (R2)LED (yellow) for temperature of relay (R1) |
| Mounting support: | 35 mm symmetrical DIN rail conforming to EN/IEC 60715 |
| Electrical durability: | 10000 cycles |
| Mechanical durability: | 30000000 cycles |
| Operating rate: | |
| Utilisation category: | AC-12 conforming to IEC 60947-5-1AC-13 conforming to IEC 60947-5-1AC-14 conforming to IEC 60947-5-1AC-15 conforming to IEC 60947-5-1DC-12 conforming to IEC 60947-5-1DC-13 conforming to IEC 60947-5-1 |
| Width: | 35 mm |
| Net weight: | 0.13 kg |
| Compatibility code: | RM3 |
In short
Reference RM35TM250MW
Product Name motor voltage and temperature control relay - RM35-T - 24..240 V AC/DC - 2 NO - RM35TM250MW
Related Categories
