9,3/10 out of 1126 reviews
SCHNEIDER

Modular liquid level control relay, 5 A, 2 CO, 24...240 V AC/DC - RM35LM33MW

RM35LM33MW

€68.89 Excl. Tax
€82.67 Inc. Tax
available In stock more than 100 units – Dispatched within 24/48h
  • check2 Technical support and dedicated single point of contact
  • check2 Free delivery from 100€ of purchase (Metropolitan France)
  • check2 100% secure payments maestro mastercard paypal visa payplug fintecture alma
Technical informations
Range of product: Harmony Control Relays
Product or component type: Level control relay
Relay type: Level control relay
Relay name: RM35L
Relay monitored parameters: Detection by resistive probes
Time delay type: Adjustable 0.1...5 s, +/- 10 %
Switching capacity in VA: 1250 VA
Minimum switching current: 10 mA at 5 V DC
Maximum switching current: 5 A AC/DC
Maximum power consumption in VA: 5 VA AC
Measurement range: 250 Ohm...1 MOhm
Utilisation category: AC-12 conforming to IEC 60947-5-1AC-13 conforming to IEC 60947-5-1AC-14 conforming to IEC 60947-5-1AC-15 conforming to IEC 60947-5-1DC-12 conforming to IEC 60947-5-1DC-13 conforming to IEC 60947-5-1
Contacts type and composition: 2 C/O
Connections - terminals: Screw connectors
[Uc] control circuit voltage: 24...240 V
[In] rated current: 5 A
Reset time: 1750 ms
Maximum switching voltage: 250 V AC/DC
[Us] rated supply voltage: 24...240 V AC/DC 50/60 Hz +/- 10 %
Supply voltage limits: 20.4...264 V AC/DC
Control circuit voltage limits: - 15 % + 10 % Un
Maximum power consumption in W: 1.5 W DC
Output contacts: 2 C/O
Nominal output current: 5 A
Run-up delay at power-up: 0.6 s
Measurement accuracy: +/- 10 % of the full scale value+/- 20 % for the HS range
Repeat accuracy: +/- 2 % for time delay
Measurement error: 0.5 %/°C with temperature variation
Maximum cable distance between devices: 100 m
Sensitivity scale: 0.25...5 kOhm LS (Low Sensitivity)5...100 kOhm St (Standard Sensitivity)50...1000 kOhm HS (High Sensitivity)
Sensitivity adjustment: 5...100 %
Maximum supply current for sensors: 1 mA
Cable capacitance: 1 nF at HS (High Sensitivity) for probe cable2.2 nF at St (Standard Sensitivity) for probe cable4.7 nF at LS (Low Sensitivity)
Marking: CE
Overvoltage category: III conforming to IEC 60664-1
Insulation resistance: > 500 MOhm at 500 V DC between supply and relay output conforming to IEC 60255-5> 500 MOhm at 500 V DC between measurement and relay output conforming to IEC 60664-1> 1 MOhm at 500 V DC between supply and measurement conforming to IEC 60255-5> 500 MOhm at 500 V DC between supply and relay output conforming to IEC 60664-1> 500 MOhm at 500 V DC between measurement and relay output conforming to IEC 60255-5> 1 MOhm at 500 V DC between supply and measurement conforming to IEC 60664-1
[Ui] rated insulation voltage: 250 V conforming to IEC 60664-1
[Uimp] rated impulse withstand voltage: 4 kV conforming to IEC 60255-54 kV conforming to IEC 60664-14 kV conforming to IEC 61000-4-5
Operating position: Any position without derating
Connections - terminals: Screw terminals, 1 x 0.5...1 x 4 mm² (AWG 20...AWG 11) solid without cable endScrew terminals, 2 x 0.5...2 x 2.5 mm² (AWG 20...AWG 14) solid without cable endScrew terminals, 2 x 0.2...2 x 1.5 mm² (AWG 24...AWG 16) flexible with cable endScrew terminals, 1 x 0.2...1 x 2.5 mm² (AWG 24...AWG 12) flexible with cable end
Tightening torque: 0.6...1 N.m conforming to IEC 60947-1
Housing material: Self-extinguishing plastic
Local signalling: LED (yellow) for relay ONLED (green) for power ONLED (yellow) for timer ON
Mounting support: 35 mm symmetrical DIN rail conforming to EN/IEC 60715
Electrical durability: 100000 cycles
Mechanical durability: 30000000 cycles
Operating rate:
Safety reliability data: B10d = 170000MTTFd = 182.6 years
Width: 35 mm
Functionality: Resistive probe detection
Compatibility code: RM3
In short
Reference RM35LM33MW
Product Name Modular liquid level control relay, 5 A, 2 CO, 24...240 V AC/DC - RM35LM33MW
Related Categories