SCHNEIDER
variable speed drive ATV650 - 7.5kW/10HP - 380...480V - IP55 - ATV650U75N4
ATV650U75N4
€1,675.92 Excl. Tax
€2,011.10 Inc. Tax
Excl. Tax
Excl. Tax
Incl. Tax
Incl. Tax
You save
In stock – Dispatched within 24/48h
- Technical support and dedicated single point of contact
- Free delivery from 100€ of purchase (Metropolitan France)
- 100% secure payments
Technical informations
| Range of product: | Altivar Process ATV600 |
|---|---|
| Product or component type: | Variable speed drive |
| Product specific application: | Process and utilities |
| Device short name: | ATV650 |
| Variant: | Standard version |
| Product destination: | Asynchronous motorsSynchronous motors |
| EMC filter: | Integrated with 50 m conforming to EN/IEC 61800-3 category C2Integrated with 150 m conforming to EN/IEC 61800-3 category C3 |
| IP degree of protection: | IP55 conforming to IEC 60529IP55 conforming to IEC 61800-5-1 |
| [Us] rated supply voltage: | 380...480 V |
| Type of cooling: | Forced convection |
| Supply frequency: | 50...60 Hz - 5...5 % |
| [Us] rated supply voltage: | 380...480 V - 15...10 % |
| Motor power kW: | 5.5 kW (heavy duty)7.5 kW (normal duty) |
| Motor power hp: | 5 hp heavy duty10 hp normal duty |
| Line current: | 9.1 A at 480 V (normal duty)8 A at 380 V (heavy duty)7.2 A at 480 V (heavy duty)13.8 A at 380 V (normal duty) |
| Prospective line Isc: | 50 kA |
| Apparent power: | 6 kVA at 480 V (heavy duty)9.9 kVA at 480 V (normal duty) |
| Continuous output current: | 9.3 A at 4 kHz for heavy duty16.5 A at 4 kHz for normal duty |
| Maximum transient current: | 14 A during 60 s (heavy duty)18.2 A during 60 s (normal duty) |
| Asynchronous motor control profile: | Variable torque standardOptimized torque modeOptimized torque mode |
| Synchronous motor control profile: | Synchronous reluctance motorPermanent magnet motor |
| Speed drive output frequency: | 0.1...500 Hz |
| Nominal switching frequency: | 4 kHz |
| Switching frequency: | 4...12 kHz with derating factor2...12 kHz adjustable |
| Safety function: | STO (safe torque off) SIL 3 |
| Discrete input logic: | 16 preset speeds |
| Communication port protocol: | Modbus serialEthernetModbus serial |
| Option card: | Slot A: communication module, PROFINETSlot A: communication module, DeviceNetSlot A: communication module, Modbus TCP/EtherNet/IPSlot A: communication module, CANopen daisy chain RJ45Slot A: communication module, CANopen SUB-D 9Slot A: communication module, CANopen screw terminalsSlot A/slot B: digital and analog I/O extension moduleSlot A/slot B: output relay extension moduleSlot A: communication module, Ethernet IP/Modbus TCP/MD-LinkCommunication module, BACnet MS/TPCommunication module, Ethernet PowerlinkSlot A: communication module, Profibus DP V1 |
| Design of frequency changer: | U converter |
|---|---|
| Network frequency: | 50...60 Hz |
| Ambient air transport temperature: | -40...70 °C |
| Relative symmetric mains voltage tolerance: | 10 % |
| Maximum output voltage: | 480.0 V |
| Relative symmetric network frequency tolerance: | 5 % |
| Maximum acceleration under shock impact (during operation): | 150 m/s² at 11 ms |
| Permitted relative humidity (during operation): | Class 3K5 according to EN 60721-3 |
| Maximum acceleration under vibrational stress (during operation): | 10 m/s² at 13...200 Hz |
| Nominal output power: | 7.5 kW |
| 4 quadrant operation possible: | False |
| Permitted relative humidity (during transport): | Class 2K5 according to EN 60721-3 |
| Permitted relative humidity (during storage): | Class 1K5 according to EN 60721-3 |
| Capacity of DC link: | 1000.0 µF |
| Maximum deflection under vibratory load (during operation): | 1.5 mm at 2...13 Hz |
| Operating element present: | True |
| Number of HW interfaces serial TTY: | 0 |
| Power loss per device current dependent: | 259.0 W |
| Power loss static current independent: | 17.0 W |
| Number of output phases: | 3 |
| Maximum acceleration under vibratory load (during transport): | 10 m/s² at 13...200 Hz |
| Number of input phases: | 3 |
| Number of inputs, potential-free: | 0 |
| Maximum deflection under vibratory load (during transport): | 1.5 mm at 2...13 Hz |
| Brake chopper integrated: | False |
| Maximum acceleration under shock load (during transport): | 150 m/s² at 11 ms |
| Number of HW interfaces USB: | 0 |
| Number of HW interfaces other: | 0 |
| Optical interface present: | False |
| Computer port: | True |
| Supporting protocol for TCP/IP: | True |
| Application in industrial area permitted: | True |
| Application in domestic and commercial area permitted: | False |
| Supporting protocol for PROFIBUS: | True |
| Number of HW interfaces industrial Ethernet: | 1 |
| Number of inputs, bidirectional, not potential-free: | 0 |
| 1 phase low current possible: | False |
| Number of HW interfaces parallel: | 0 |
| Supporting protocol for KNX: | False |
| Supporting protocol for ASI: | False |
| Number of HW interfaces PROFINET: | 0 |
| Supporting protocol for CAN: | True |
| Supporting protocol for INTERBUS: | False |
| Supporting protocol for DeviceNet: | False |
| Supporting protocol for SUCONET: | False |
| Supporting protocol for LON: | False |
| Supporting protocol for MODBUS: | True |
| Supporting protocol for Data-Highway: | False |
| Supporting protocol for PROFINET IO: | True |
| Supporting protocol for PROFINET CBA: | True |
| Maximum acceleration under shock load (during storage): | 150 m/s² at 11 ms |
| Supporting protocol for Foundation Fieldbus: | False |
| Supporting protocol for SERCOS: | False |
| Maximum deflection under vibratory load (during storage): | 1.5 mm at 2...13 Hz |
| Supporting protocol for DeviceNet Safety: | False |
| Supporting protocol for INTERBUS-Safety: | False |
| Supporting protocol for PROFIsafe: | False |
| Supporting protocol for EtherNet/IP: | True |
| Supporting protocol for AS-Interface Safety at Work: | False |
| Maximum acceleration under vibratory load (during storage): | 10 m/s² at 13...200 Hz |
| With safety function Safe torque off (STO): | True |
| With sft fct Safe Stop 2 (SS2): | False |
| With safety function Safe Stop 1 (SS1): | False |
| Supporting protocol for SafetyBUS P: | False |
| Supporting protocol for BACnet: | False |
| Supporting protocol for other bus systems: | False |
| Nominal output current: | 16.5 A |
| With safety function Safe brake management (SBC/SBT): | False |
| With safety function Safe Operating Stop (SOS): | False |
| With safety function Safely Limited Position (SLP): | False |
| With safety function Safely Limited Speed (SLS): | False |
| With safety function Safe Speed Monitor (SSM): | False |
| With safety function Safe Direction (SDI): | False |
| Base load current at high overload: | 12.7 A |
| Base load current at low overload: | 16.5 A |
| Number of HW interfaces serial RS232: | 0 |
| With safety function Safe programmable logic: | False |
| With safety function Safe Position (SP): | False |
| EMC limit value (complied): | True |
| Environmental class (during transport): | Class 2C3 according to EN 60721-3-2Class 2S1 according to EN 60721-3-2 |
| Environmental class (during operation): | Class 3C3 according to IEC 60721-3-3Class 3S3 according to IEC 60721-3-3 |
| Environmental class (during storage): | Class 1C3 according to EN 60721-3-1Class 1S2 according to EN 60721-3-1 |
| Number of HW interfaces serial RS422: | 0 |
| Number of HW interfaces serial RS485: | 1 |
| Mounting mode: | Wall mount |
| Network number of phases: | 3 phases |
| Discrete output number: | 0 |
| Discrete output type: | Relay outputs R1A, R1B, R1C 250 V AC 3000 mARelay outputs R1A, R1B, R1C 30 V DC 3000 mARelay outputs R2A, R2C 250 V AC 5000 mARelay outputs R2A, R2C 30 V DC 5000 mARelay outputs R3A, R3C 250 V AC 5000 mARelay outputs R3A, R3C 30 V DC 5000 mA |
| Output voltage: | |
| Permissible temporary current boost: | 1.5 x In during 60 s (heavy duty)1.1 x In during 60 s (normal duty) |
| Motor slip compensation: | Can be suppressedNot available in permanent magnet motor lawAutomatic whatever the loadAutomatic whatever the load |
| Acceleration and deceleration ramps: | Linear adjustable separately from 0.01...9999 s |
| Physical interface: | Ethernet2-wire RS 485 |
| Braking to standstill: | By DC injection |
| Protection type: | Safe torque off: motorMotor phase break: motorThermal protection: driveSafe torque off: driveOverheating: driveOvercurrent between output phases and earth: driveOverload of output voltage: driveShort-circuit protection: driveMotor phase break: driveOvervoltages on the DC bus: driveLine supply overvoltage: driveLine supply undervoltage: driveLine supply phase loss: driveOverspeed: driveBreak on the control circuit: driveThermal protection: motor |
| Transmission rate: | 10, 100 Mbits4800 bps, 9600 bps, 19200 bps, 38.4 Kbps |
| Frequency resolution: | Analog input: 0.012/50 HzDisplay unit: 0.1 Hz |
| Transmission frame: | RTU |
| Electrical connection: | Line side: screw terminal 4...6 mm²/AWG 12...AWG10Motor: screw terminal 4...6 mm²/AWG 12...AWG10Control: removable screw terminals 0.5...1.5 mm²/AWG 20...AWG 16 |
| Connector type: | RJ45 (on the remote graphic terminal) for Modbus serialRJ45 (on the remote graphic terminal) for Ethernet/Modbus TCP |
| Data format: | 8 bits, configurable odd, even or no parity |
| Type of polarization: | No impedance |
| Exchange mode: | Half duplex, full duplex, autonegotiation Ethernet/Modbus TCP |
| Number of addresses: | 1...247 for Modbus serial |
| Method of access: | Slave Modbus TCP |
| Supply: | Internal supply for reference potentiometer (1 to 10 kOhm): 10.5 V DC +/- 5 %, Internal supply for digital inputs and STO: 24 V DC (21...27 V), External supply for digital inputs: 24 V DC (19...30 V), |
| Local signalling: | 3 LEDs (dual colour) for embedded communication status4 LEDs (dual colour) for communication module status1 LED (red) for presence of voltage3 LEDs for local diagnostic |
| Width: | 264 mm |
| Height: | 678 mm |
| Depth: | 299 mm |
| Net weight: | 13.7 kg |
| Analogue input number: | 3 |
| Analogue input type: | AI1, AI2, AI3 software-configurable voltage: 0...10 V DC, impedance: 31.5 kOhm, resolution 12 bitsAI1, AI2, AI3 software-configurable current: 0...20 mA, impedance: 250 Ohm, resolution 12 bitsAI2 voltage analog input: - 10...10 V DC, impedance: 31.5 kOhm, resolution 12 bits |
| Discrete input number: | 8 |
| Discrete input type: | DI7, DI8 programmable as pulse input: 0...30 kHz, 24 V DC ( |
| Input compatibility: | DI5, DI6: discrete input level 1 PLC conforming to IEC 65A-68STOA, STOB: discrete input level 1 PLC conforming to EN/IEC 61131-2DI1...DI6: discrete input level 1 PLC conforming to EN/IEC 61131-2 |
| Discrete input logic: | Positive logic (source) (DI1...DI8), 11 V (state 1)Negative logic (sink) (DI1...DI8), > 16 V (state 0), |
| Analogue output number: | 2 |
| Analogue output type: | Software-configurable voltage AQ1, AQ2: 0...10 V DC impedance 470 Ohm, resolution 10 bitsSoftware-configurable current AQ1, AQ2: 0...20 mA, resolution 10 bitsSoftware-configurable current DQ-, DQ+: 30 V DCSoftware-configurable current DQ-, DQ+: 100 mA |
| Sampling duration: | 5 ms +/- 1 ms (DI5, DI6) - discrete input5 ms +/- 0.1 ms (AI1, AI2, AI3) - analog input10 ms +/- 1 ms (AO1) - analog output2 ms +/- 0.5 ms (DI1...DI4) - discrete input |
| Accuracy: | +/- 1 % AO1, AO2 for a temperature variation 60 °C analog output+/- 0.6 % AI1, AI2, AI3 for a temperature variation 60 °C analog input |
| Linearity error: | AO1, AO2: +/- 0.2 % for analog outputAI1, AI2, AI3: +/- 0.15 % of maximum value for analog input |
| Relay output number: | 3 |
| Relay output type: | Configurable relay logic R2: sequence relay NO electrical durability 100000 cyclesConfigurable relay logic R3: sequence relay NO electrical durability 100000 cyclesConfigurable relay logic R1: fault relay NO/NC electrical durability 100000 cycles |
| Refresh time: | Relay output (R1, R2, R3): 5 ms (+/- 0.5 ms) |
| Minimum switching current: | Relay output R1, R2, R3: 5 mA at 24 V DC |
| Maximum switching current: | Relay output R1, R2, R3 on resistive load, cos phi = 1: 3 A at 30 V DCRelay output R1, R2, R3 on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 250 V ACRelay output R1, R2, R3 on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 30 V DCRelay output R1, R2, R3 on resistive load, cos phi = 1: 3 A at 250 V AC |
| Isolation: | Between power and control terminals |
| Maximum output frequency: | 500 kHz |
| Maximum associated fuse rating: | 25.0 A |
| Maximum input current: | 13.8 A |
| Specific application: | Utility |
| IP degree of protection: | IP55 |
| Discrete and process manufacturing: | Building - HVAC Compressor centrifugal |
| Power range: | 7...11 kW at 380...440 V 3 phases |
| Motor starter type: | Variable speed drive |
| Housing material: | Plastic |
| Quantity per set: | 1 |
| Enclosure mounting: | Wall mounted |
In short
Reference ATV650U75N4
Product Name variable speed drive ATV650 - 7.5kW/10HP - 380...480V - IP55 - ATV650U75N4
Related Categories
