SCHNEIDER
soft starter for asynchronous motor - ATS01 - 22 A - 380..415V - 7.5..11 KW - ATS01N222QN
ATS01N222QN
€236.52 Excl. Tax
€283.82 Inc. Tax
Excl. Tax
Excl. Tax
Incl. Tax
Incl. Tax
You save
In stock more than 25 units – Dispatched within 24/48h
- Technical support and dedicated single point of contact
- Free delivery from 100€ of purchase (Metropolitan France)
- 100% secure payments
Technical informations
| Range of product: | Altistart 01 |
|---|---|
| Product or component type: | Soft starter |
| Product destination: | Asynchronous motors |
| Product specific application: | Simple machine |
| Device short name: | ATS01 |
| Network number of phases: | 3 phases |
| [Us] rated supply voltage: | 380...415 V - 10...10 % |
| Motor power kW: | 11 kW, 3 phases at 380...415 V7.5 kW, 3 phases at 380...415 V |
| IcL starter rating: | 22 A |
| Utilisation category: | AC-53B conforming to EN/IEC 60947-4-2 |
| Current consumption: | 110 A at nominal load |
| Type of start: | Start with voltage ramp |
| Power dissipation in W: | 124.5 W in transient state4.5 W at full load and at end of starting |
| Assembly style: | With heat sink |
|---|---|
| Function available: | Integrated bypass |
| Supply voltage limits: | 342...456 V |
| Supply frequency: | 50...60 Hz - 5...5 % |
| Network frequency: | 47.5...63 Hz |
| Output voltage: | |
| [Uc] control circuit voltage: | Built into the starter |
| Starting time: | 1 s / 1005 s / 2010 s / 10Adjustable from 1 to 10 s |
| Deceleration time symb: | Adjustable from 1 to 10 s |
| Starting torque: | 30...80 % of starting torque of motor connected directly on the line supply |
| Discrete input type: | Logic (LI1, LI2, BOOST) stop, run and boost on start-up functions |
| Discrete input voltage: | 24...40 V |
| Discrete input logic: | Positive LI1, LI2, BOOST at State 0: 13 V, >= 0.5 mA |
| Discrete output current: | 2 A DC-133 A AC-15 |
| Discrete output type: | Open collector logic LO1 end of starting signalRelay outputs R1A, R1C NO |
| Discrete output voltage: | 24 V (voltage limits: 6...30 V) open collector logic |
| Minimum switching current: | 10 mA at 6 V DC for relay outputs |
| Maximum switching current: | Relay outputs: 2 A at 250 V AC cos phi = 0.5 and L/R = 20 ms inductive loadRelay outputs: 2 A at 30 V DC cos phi = 0.5 and L/R = 20 ms inductive load |
| Display type: | 1 LED (green) for starter powered up1 LED (yellow) for nominal voltage reached |
| Tightening torque: | 0.5 N.m1.9...2.5 N.m |
| Electrical connection: | 4 mm screw clamp terminal - rigid 1 1...10 mm² AWG 8 power circuitScrew connector - rigid 1 0.5...2.5 mm² AWG 14 control circuit4 mm screw clamp terminal - rigid 2 1...6 mm² AWG 10 power circuitScrew connector - rigid 2 0.5...1 mm² AWG 17 control circuitScrew connector - flexible with cable end 1 0.5...1.5 mm² AWG 16 control circuit4 mm screw clamp terminal - flexible without cable end 1 1.5...10 mm² AWG 8 power circuitScrew connector - flexible without cable end 1 0.5...2.5 mm² AWG 14 control circuit4 mm screw clamp terminal - flexible with cable end 2 1...6 mm² AWG 10 power circuit4 mm screw clamp terminal - flexible without cable end 2 1.5...6 mm² AWG 10 power circuitScrew connector - flexible without cable end 2 0.5...1.5 mm² AWG 16 control circuit |
| Marking: | CE |
| Operating position: | Vertical +/- 10 degree |
| Height: | 154 mm |
| Width: | 45 mm |
| Depth: | 131 mm |
| Product weight: | 0.56 kg |
| Compatibility code: | ATS01N2 |
| Power range: | 7...11 kW at 380...440 V 3 phases |
| Motor starter type: | Soft starter |
In short
Reference ATS01N222QN
Product Name soft starter for asynchronous motor - ATS01 - 22 A - 380..415V - 7.5..11 KW - ATS01N222QN
Related Categories
