Money back guarantee
Secure payments
Volume discount
0

Welcome

controller M221 16 IO relay Ethernet  - TM221ME16R

Excl. Tax: €272.54 Incl. Tax: €272.54

Quick Overview

  • Main
    • range of product : Modicon M221
    • product or component type : Logic controller
    • [Us] rated supply voltage : 24 V DC
    • discrete input number : 8 discrete input conforming to IEC 61131-2 Type 1
    • analogue input number : 2 at input range: 0...10 V
    • discrete output type : Relay normally open
    • discrete output number : 8 relay
    • discrete output voltage : 5...125 V DC
      5...250 V AC
    • discrete output current : 2 A

Details - Logic controller

  • Complementary
    • discrete I/O number : 16
    • number of I/O expansion module : <= 7 for relay output
    • supply voltage limits : 20.4...28.8 V
    • inrush current : <= 35 A
    • power consumption in W : <= 23.3 W at 24 V with max number of I/O expansion module
      <= 4.3 W at 24 V without I/O expansion module
    • power supply output current : 0.52 A at 5 V for expansion bus
      0.46 A at 24 V for expansion bus
    • discrete input logic : Sink or source (positive/negative)
    • discrete input voltage : 24 V
    • discrete input voltage type : DC
    • analogue input resolution : 10 bits
    • LSB value : 10 mV
    • conversion time : 1 ms per channel + 1 controller cycle time for analog input
    • permitted overload on inputs : +/- 30 V DC for analog input with 5 min maximum
      +/- 13 V DC for analog input permanent
    • voltage state1 guaranteed : >= 15 V for input
    • voltage state 0 guaranteed : <= 5 V for input
    • discrete input current : 7 mA for discrete input
      5 mA for fast input
    • input impedance : 3.4 kOhm for input
      4.9 kOhm for fast input
      100 kOhm for analog input
    • response time : 35 µs turn-off operation for input, I2...I5 terminal
      5 µs turn-on operation for fast input, I0, I1, I6, I7 terminal
      35 µs turn-on operation for input, other terminals terminal
      5 µs turn-off operation for fast input, I0, I1, I6, I7 terminal
      100 µs turn-off operation for input, other terminals terminal
      5 µs turn-on, turn-off operation for output, Q0...Q1 terminal
      50 µs turn-on, turn-off operation for output, Q2...Q3 terminal
      300 µs turn-on, turn-off operation for output, other terminals terminal
    • configurable filtering time : 0 ms for input
      12 ms for input
      3 ms for input
    • output voltage limits : 125 V DC
      277 V AC
    • current per output common : 7 A
    • absolute accuracy error : +/- 1 % of full scale for analog input
    • electrical durability : Inductive AC-15, (cos phi = 0.35) 240 V / 120 VA : 100000 cycles
      Resistive DC-12, 24 V / 48 W : 100000 cycles
      Resistive AC-12, 120 V / 240 VA : 100000 cycles
      Inductive AC-15, (cos phi = 0.35) 240 V / 36 VA : 300000 cycles
      Resistive AC-12, 120 V / 80 VA : 300000 cycles
      Inductive (L/R = 7 ms) DC-13, 24 V / 24 W : 100000 cycles
      Resistive DC-12, 24 V / 16 W : 300000 cycles
      Inductive (L/R = 7 ms) DC-13, 24 V / 7.2 W : 300000 cycles
      Inductive AC-14, (cos phi = 0.7) 240 V / 240 VA : 100000 cycles
      Inductive AC-15, (cos phi = 0.35) 120 V / 60 VA : 100000 cycles
      Inductive AC-14, (cos phi = 0.7) 240 V / 72 VA : 300000 cycles
      Inductive AC-15, (cos phi = 0.35) 120 V / 18 VA : 300000 cycles
      Resistive AC-12, 240 V / 480 VA : 100000 cycles
      Inductive AC-14, (cos phi = 0.7) 120 V / 120 VA : 100000 cycles
      Resistive AC-12, 240 V / 160 VA : 300000 cycles
      Inductive AC-14, (cos phi = 0.7) 120 V / 36 VA : 300000 cycles
    • switching frequency : 20 switching operations/minute with maximum load
    • mechanical durability : >= 20000000 cycles for relay output
    • minimum load : 1 mA at 5 V DC for relay output
    • protection type : Without protection at 5 A
    • reset time : 1 s
    • memory capacity : 256 kB for user application and data RAM with 10000 instructions
      256 kB for internal variables RAM
    • data backed up : 256 kB built-in flash memory for backup of application and data
    • data storage equipment : 2 GB SD card optional
    • battery type : BR2032 lithium non-rechargeable, battery life: 4 yr
    • backup time : 1 year at 25 °C by interruption of power supply
    • execution time for 1 KInstruction : 0.3 ms for event and periodic task
      0.7 ms for other instruction
    • execution time per instruction : 0.2 µs Boolean
    • exct time for event task : 60 µs response time
    • application structure : 1 configurable freewheeling/cyclic master task
      8 interrupt tasks
      1 cyclic auxiliary task
    • maximum size of object areas : 512 %M memory bits
      255 %TM timers
      512 %KW constant words
      255 %C counters
      8000 %MW memory words
    • realtime clock : With
    • clock drift : <= 30 s/month at 25 °C
    • regulation loop : Adjustable PID regulator up to 14 simultaneous loops
    • function available : Frequency generator
      PWM
      PLS
    • counting input number : 4 fast input (HSC mode) (counting frequency: 100 kHz), counting capacity: 32 bits
    • control signal type : Single phase
      A/B
      Pulse/direction
    • integrated connection type : USB port with connector mini B USB 2.0
      Ethernet with connector RJ45
      Non isolated serial link serial 1" with connector RJ45 and interface RS232/RS485
    • supply : Serial 1 serial link supply at 5 V 200 mA
    • transmission rate : 1.2...115.2 kbit/s (115.2 kbit/s by default) for bus length of 15 m - communication protocol: RS485
      1.2...115.2 kbit/s (115.2 kbit/s by default) for bus length of 3 m - communication protocol: RS232
      480 Mbit/s - communication protocol: USB
    • communication port protocol : USB port : USB protocol - SoMachine-Network
      Non isolated serial link : Modbus protocol master/slave - RTU/ASCII or SoMachine-Network
      : Ethernet protocol
    • port Ethernet : 10BASE-T/100BASE-TX 1 port with 100 m copper cable
    • communication service : Ethernet/IP adapter
      Modbus TCP client
      Modbus TCP server
      Modbus TCP slave device
      DHCP client
    • local signalling : 1 LED green for SD card access (SD)
      1 LED red for BAT
      1 LED per channel green for I/O state
      1 LED green for SL
      Ethernet network activity green for ACT
      Ethernet network link yellow for Link (Link Status)
      1 LED red for module error (ERR)
      1 LED green for PWR
      1 LED green for RUN
    • electrical connection : Mini B USB 2.0 connector for a programming terminal
      Removable screw terminal block, 10 terminal(s) for inputs
      Removable screw terminal block, 11 terminal(s) for outputs
      Terminal block, 3 terminal(s) for connecting the 24 V DC power supply
      Connector, 4 terminal(s) for analogue inputs
    • cable length : <= 10 m shielded cable for fast input
      <= 3 m shielded cable for fast output
      <= 30 m unshielded cable for output
      <= 30 m unshielded cable for digital input
      <= 1 m unshielded cable for analog input
    • insulation : 500 V AC between fast input and internal logic
      Non-insulated between inputs
      Non-insulated between analogue inputs
      500 V AC between output and internal logic
      500 V AC between input and internal logic
      Non-insulated between analogue input and internal logic
      500 V AC between output groups
    • marking : CE
    • mounting support : Top hat type TH35-15 rail conforming to IEC 60715
      Top hat type TH35-7.5 rail conforming to IEC 60715
      Plate or panel with fixing kit
    • height : 90 mm
    • depth : 70 mm
    • width : 70 mm
    • product weight : 0.264 kg
"

Additional Information - TM221ME16R

Manufacturer Schneider
Code EAN 3606480611278
Plus d'infos
  • Environment
    • standards : EN/IEC 61010-2-201
      EN/IEC 61131-2
      EN/IEC 60664-1
    • product certifications : cULus
      ABS
      LR
      DNV-GL
      RCM
      EAC
      CSA
      IACS E10
    • environmental characteristic : Ordinary and hazardous location
    • resistance to electrostatic discharge : 4 kV on contact conforming to EN/IEC 61000-4-2
      8 kV in air conforming to EN/IEC 61000-4-2
    • resistance to electromagnetic fields : 10 V/m ( 80 MHz...1 GHz) conforming to EN/IEC 61000-4-3
      3 V/m ( 1.4 GHz...2 GHz) conforming to EN/IEC 61000-4-3
      1 V/m ( 2...2.7 GHz) conforming to EN/IEC 61000-4-3
    • resistance to magnetic fields : 30 A/m at 50...60 Hz conforming to EN/IEC 61000-4-8
    • resistance to fast transients : 2 kV for power lines conforming to EN/IEC 61000-4-4
      2 kV for relay output conforming to EN/IEC 61000-4-4
      1 kV for Ethernet line conforming to EN/IEC 61000-4-4
      1 kV for serial link conforming to EN/IEC 61000-4-4
      1 kV for I/O conforming to EN/IEC 61000-4-4
    • surge withstand : 2 kV for power lines (AC) in common mode conforming to EN/IEC 61000-4-5
      2 kV for relay output in common mode conforming to EN/IEC 61000-4-5
      1 kV for I/O in common mode conforming to EN/IEC 61000-4-5
      1 kV for shielded cable in common mode conforming to EN/IEC 61000-4-5
      0.5 kV for power lines (DC) in differential mode conforming to EN/IEC 61000-4-5
      1 kV for power lines (AC) in differential mode conforming to EN/IEC 61000-4-5
      1 kV for relay output in differential mode conforming to EN/IEC 61000-4-5
      0.5 kV for power lines (DC) in common mode conforming to EN/IEC 61000-4-5
    • resistance to conducted disturbances, induced by radio frequency fields : 10 Vrms (0.15...80 MHz) conforming to EN/IEC 61000-4-6
      3 Vrms (0.1...80 MHz) conforming to Marine specification (LR, ABS, DNV, GL)
      10 Vrms (spot frequency (2, 3, 4, 6.2, 8.2, 12.6, 16.5, 18.8, 22, 25 MHz)) conforming to Marine specification (LR, ABS, DNV, GL)
    • electromagnetic emission : Conducted emissions conforming to EN/IEC 55011 power lines (AC), 0.15...0.5 MHz : 79 dBμV/m QP/66 dBμV/m AV
      Conducted emissions conforming to EN/IEC 55011 power lines (AC), 0.5...300 MHz : 73 dBμV/m QP/60 dBμV/m AV
      Conducted emissions conforming to EN/IEC 55011 power lines, 10...150 kHz : 120...69 dBµV/m QP
      Conducted emissions conforming to EN/IEC 55011 power lines, 150 kHz...1.5 MHz : 79...63 dBμV/m QP
      Conducted emissions conforming to EN/IEC 55011 power lines, 1.5...30 MHz : 63 dBμV/m QP
      Radiated emissions conforming to EN/IEC 55011 class A 10 m, 30...230 MHz : 40 dBμV/m QP
      Radiated emissions conforming to EN/IEC 55011 class A 10 m, 200 MHz...1 GHz : 47 dBμV/m QP
    • immunity to microbreaks : 10 ms
    • ambient air temperature for operation : -10...55 °C for horizontal installation
      -10...35 °C for vertical installation
    • ambient air temperature for storage : -25...70 °C
    • relative humidity : 10...95 % without condensation in operation
      10...95 % without condensation in storage
    • IP degree of protection : IP20 with protective cover in place
    • pollution degree : <= 2
    • operating altitude : 0...2000 m
    • storage altitude : 0...3000 m
    • vibration resistance : 3.5 mm (vibration frequency: 5...8.4 Hz) on symmetrical rail
      1 gn (vibration frequency: 8.4...150 Hz) on symmetrical rail
      3.5 mm (vibration frequency: 5...8.4 Hz) on panel mounting
      1 gn (vibration frequency: 8.4...150 Hz) on panel mounting
    • shock resistance : 98 m/s² (test wave duration:11 ms)
  • Offer Sustainability
    • Sustainable offer status : Green Premium product
    • RoHS (date code: YYWW) : Compliant  - since  1348  -  Schneider Electric declaration of conformity 
    • REACh :
    • Product environmental profile : Available
    • Product end of life instructions : Available
My Cart

You have no items in your shopping cart.