SCHNEIDER
TeSys K - star delta starter - 3 x 3P (3 NO) - 9 A - 230 V AC coil - LC3K09P7
LC3K09P7
This product is no longer available. Contact us for a suitable replacement solution tailored to your needs.
Technical informations
| Range of product: | TeSys K |
|---|---|
| Range: | TeSys |
| Product name: | TeSys K |
| Product or component type: | Star delta starter |
| Device short name: | LC3K |
| Contactor application: | Motor control |
| Utilisation category: | AC-3 |
| Device presentation: | Pre-wired |
| Poles description: | 3 x 3P |
| Pole contact composition: | 3 x 3 NO |
| [Ue] rated operational voltage: | Power circuit: |
| [Ie] rated operational current: | 9 A (at |
| Motor power kW: | 4 kW at 220/230 V AC 50/60 Hz7.5 kW at 380/400 V AC 50/60 Hz7.5 kW at 415 V AC 50/60 Hz7.5 kW at 440 V AC 50/60 Hz |
| Control circuit type: | AC at 50/60 Hz |
| [Uc] control circuit voltage: | 230 V AC 50/60 Hz |
| Auxiliary contact composition: | 1 NC for KM1 star contactor |
| [Uimp] rated impulse withstand voltage: | 8 kV |
| Overvoltage category: | III |
| [Ui] rated insulation voltage: | Power circuit: 750 V conforming to VDE 0110 group CPower circuit: 690 V conforming to IEC 60947Power circuit: 690 V conforming to BS 5424Power circuit: 690 V conforming to NF C 20-040Power circuit: 600 V CSA 22-2 certifiedPower circuit: 600 V UL 508 certifiedSignalling circuit: 750 V conforming to VDE 0110 group CSignalling circuit: 690 V conforming to IEC 60947Signalling circuit: 690 V conforming to BS 5424Signalling circuit: 690 V conforming to NF C 20-040Signalling circuit: 600 V CSA 22-2 certifiedSignalling circuit: 600 V UL 508 certified |
| Electrical durability: | 1.3 Mcycles 9 A AC-3 at Ue |
| Interlocking type: | Mechanical |
| Mounting support: | Rail |
| Standards: | IEC 60947NF C 63-110VDE 0660 |
| Product certifications: | ULCSA |
| Connections - terminals: | Screw clamp terminals 1 1.5...4 mm² - cable stiffness: solidScrew clamp terminals 1 0.75...4 mm² - cable stiffness: flexible without cable endScrew clamp terminals 1 0.34...2.5 mm² - cable stiffness: flexible with cable endScrew clamp terminals 2 1.5...4 mm² - cable stiffness: solidScrew clamp terminals 2 0.75...4 mm² - cable stiffness: flexible without cable endScrew clamp terminals 2 0.34...1.5 mm² - cable stiffness: flexible with cable end |
|---|---|
| Tightening torque: | 1.3 N.m - on screw clamp terminals - with screwdriver Philips No 21.3 N.m - on screw clamp terminals - with screwdriver flat Ø 6 mm |
| Mechanical durability: | 10 Mcycles |
| Maximum operating rate: | 12 cyc/h 60 °C |
| Starting time: | 30 s |
| Coil technology: | Without built-in suppressor module |
| Control circuit voltage limits: | Operational: 0.8...1.15 Uc (at Drop-out: 0.2...0.75 Uc (at |
| Inrush power in VA: | 30 VA (at 20 °C) |
| Hold-in power consumption in VA: | 4.5 VA (at 20 °C) |
| Heat dissipation: | 1.3 W |
| Auxiliary contacts type: | Mechanically linked conforming to IEC 60947-5-1 3 x 1 NO + 1 NCMirror contact conforming to IEC 60947-4-1 3 x 1 NC |
| Minimum switching current: | 5 mA for signalling circuit |
| Switching voltage: | 17 V for signalling circuit |
| Width: | 150 mm |
| Height: | 110 mm |
| Depth: | 94 mm |
| Product weight: | 0.74 kg |
In short
Reference LC3K09P7
Product Name TeSys K - star delta starter - 3 x 3P (3 NO) - 9 A - 230 V AC coil - LC3K09P7
Range TeSys
Related Categories