SCHNEIDER

TeSys D contactor - 3P(3 NO) - AC-3 - <= 440 V 9 A - 400 V AC coil - LC1D093V7

LC1D093V7

This product is no longer available. Contact us for a suitable replacement solution tailored to your needs.

In short
Compatible with
Features
Details
Infos
Return
We recommend

Technical informations

Range of product:	TeSys D
Range:	TeSys
Product name:	TeSys D
Product or component type:	Contactor
Device short name:	LC1D
Contactor application:	Motor controlResistive load
Utilisation category:	AC-3AC-1AC-4
Poles description:	3P
Pole contact composition:	3 NO
[Ue] rated operational voltage:	Power circuit: Power circuit:
[Ie] rated operational current:	9 A (at 25 A (at
Motor power kW:	2.2 kW at 220...230 V AC 50/60 Hz (AC-3)4 kW at 380...400 V AC 50/60 Hz (AC-3)4 kW at 415...440 V AC 50/60 Hz (AC-3)5.5 kW at 500 V AC 50/60 Hz (AC-3)5.5 kW at 660...690 V AC 50/60 Hz (AC-3)2.2 kW at 400 V AC 50/60 Hz (AC-4)
Motor power hp:	1 hp at 230/240 V AC 50/60 Hz for 1 phase motors2 hp at 200/208 V AC 50/60 Hz for 3 phases motors2 hp at 230/240 V AC 50/60 Hz for 3 phases motors5 hp at 460/480 V AC 50/60 Hz for 3 phases motors7.5 hp at 575/600 V AC 50/60 Hz for 3 phases motors0.33 hp at 115 V AC 50/60 Hz for 1 phase motors
Control circuit type:	AC at 50/60 Hz
[Uc] control circuit voltage:	400 V AC 50/60 Hz
Auxiliary contact composition:	1 NO + 1 NC
[Uimp] rated impulse withstand voltage:	6 kV conforming to IEC 60947
Overvoltage category:	III
[Ith] conventional free air thermal current:	10 A (at 60 °C) for signalling circuit16 A (at 60 °C) for power circuit
Irms rated making capacity:	250 A at 440 V for power circuit conforming to IEC 60947140 A AC for signalling circuit conforming to IEC 60947-5-1250 A DC for signalling circuit conforming to IEC 60947-5-1
Rated breaking capacity:	250 A at 440 V for power circuit conforming to IEC 60947
[Icw] rated short-time withstand current:	105 A 40 °C - 10 s for power circuit210 A 40 °C - 1 s for power circuit30 A 40 °C - 10 min for power circuit61 A 40 °C - 1 min for power circuit100 A - 1 s for signalling circuit120 A - 500 ms for signalling circuit140 A - 100 ms for signalling circuit
Associated fuse rating:	10 A gG for signalling circuit conforming to IEC 60947-5-125 A gG at 20 A gG at
Average impedance:	2.5 mOhm - Ith 16 A 50 Hz for power circuit
[Ui] rated insulation voltage:	Power circuit: 690 V conforming to IEC 60947-4-1Power circuit: 600 V CSA certifiedPower circuit: 600 V UL certifiedSignalling circuit: 690 V conforming to IEC 60947-1Signalling circuit: 600 V CSA certifiedSignalling circuit: 600 V UL certified
Electrical durability:	0.6 Mcycles 25 A AC-1 at Ue 2 Mcycles 9 A AC-3 at Ue
Power dissipation per pole:	1.56 W AC-10.2 W AC-3
Protective cover:	With
Mounting support:	RailPlate
Standards:	CSA C22.2 No 14EN 60947-4-1EN 60947-5-1IEC 60947-4-1IEC 60947-5-1UL 508
Product certifications:	RINACSAGLLROS (Lloyds register of shipping)ULBVCCCDNVGOST
Connections - terminals:	Power circuit: spring terminals 1 cable(s) 2.5 mm²flexible without cable endPower circuit: spring terminals 2 cable(s) 2.5 mm²flexible without cable endControl circuit: spring terminals 1 cable(s) 2.5 mm²flexible without cable endControl circuit: spring terminals 2 cable(s) 2.5 mm²flexible without cable end
Operating time:	12...22 ms closing4...19 ms opening
Safety reliability level:	B10d = 1369863 cycles contactor with nominal load conforming to EN/ISO 13849-1B10d = 20000000 cycles contactor with mechanical load conforming to EN/ISO 13849-1
Mechanical durability:	15 Mcycles
Maximum operating rate:	3600 cyc/h 60 °C

Coil technology:	Without built-in suppressor module
Control circuit voltage limits:	0.3...0.6 Uc (-40...70 °C):drop-out AC 50/60 Hz0.8...1.1 Uc (-40...60 °C):operational AC 50 Hz0.85...1.1 Uc (-40...60 °C):operational AC 60 Hz1...1.1 Uc (60...70 °C):operational AC 50/60 Hz
Inrush power in VA:	70 VA 60 Hz cos phi 0.75 (at 20 °C)70 VA 50 Hz cos phi 0.75 (at 20 °C)
Hold-in power consumption in VA:	7.5 VA 60 Hz cos phi 0.3 (at 20 °C)7 VA 50 Hz cos phi 0.3 (at 20 °C)
Heat dissipation:	2...3 W at 50/60 Hz
Auxiliary contacts type:	type mechanically linked 1 NO + 1 NC conforming to IEC 60947-5-1 type mirror contact 1 NC conforming to IEC 60947-4-1
Signalling circuit frequency:	25...400 Hz
Minimum switching current:	5 mA for signalling circuit
Minimum switching voltage:	17 V for signalling circuit
Non-overlap time:	1.5 ms on de-energisation between NC and NO contact1.5 ms on energisation between NC and NO contact
Insulation resistance:	> 10 MOhm for signalling circuit
Contact compatibility:	M2
Compatibility code:	LC1D

IP degree of protection:	IP20 front face conforming to IEC 60529
Protective treatment:	TH conforming to IEC 60068-2-30
Pollution degree:	3
Ambient air temperature for operation:	-40...60 °C60...70 °C with derating
Ambient air temperature for storage:	-60...80 °C
Operating altitude:	0...3000 m
Fire resistance:	850 °C conforming to IEC 60695-2-1
Flame retardance:	V1 conforming to UL 94
Mechanical robustness:	Vibrations contactor open: 2 Gn, 5...300 HzVibrations contactor closed: 4 Gn, 5...300 HzShocks contactor open: 10 Gn for 11 msShocks contactor closed: 15 Gn for 11 ms
Height:	80 mm
Width:	45 mm
Depth:	86 mm
Product weight:	0.32 kg
Sustainable offer status:	Green Premium productREACh Regulation

In short

Reference LC1D093V7

Product Name TeSys D contactor - 3P(3 NO) - AC-3 - <= 440 V 9 A - 400 V AC coil - LC1D093V7

Range TeSys

Compatible with

Related Categories

Industrial electrical equipment Electrical Contactors Motor Contactors

Code EAN:	3389110802405
Délai d'approvisionnement:	4/6 weeks
Substitution_texte:	This product is no longer available. Contact us for a suitable replacement solution tailored to your needs.

Reference	Quantity

TeSys D contactor - 3P(3 NO) - AC-3 - <= 440 V 9 A - 400 V AC coil - LC1D093V7

LC1D093V7

Recently Viewed Products