SCHNEIDER
standard digital output kit STB - 24 V 115..230 V AC DC - 2 O - STBDRC3210K
STBDRC3210K
€89.53 Excl. Tax
€107.44 Inc. Tax
Excl. Tax
Excl. Tax
Incl. Tax
Incl. Tax
You save
Supply in process – Average delivery time 4/6 weeks
- Technical support and dedicated single point of contact
- Free delivery from 100€ of purchase (Metropolitan France)
- 100% secure payments
Technical informations
| Range of product: | Modicon STB distributed I/O solution |
|---|---|
| Product or component type: | Standard digital output kit |
| Kit composition: | STBXTS2110, 5-terminal spring clamp connectorSTBXTS1100, 5-terminal screw type connectorSTBXBA3000 baseSTBDRC3210 module |
| Discrete output number: | 2 |
| Discrete output type: | Relay |
| Discrete output function: | 2 NO/NC |
| Discrete output voltage: | 24 V115...230 V |
| Discrete output voltage type: | ACDC |
| Discrete output current: | 2000 mA |
|---|---|
| Discrete output logic: | Positive or negative |
| Output voltage: | 20...250 V AC5...30 V DC |
| Response time: | 5.25 ms off-to-on6.75 ms on-to-off |
| Switching capacity in VA: | 600 VA resistive |
| Mechanical durability: | 1000000 cycles |
| Electrical durability: | 100000 cycles resistive |
| Cold swapping: | Yes |
| Hot swapping fallback: | Yes for standard NIMs |
| Fallback status: | State 0 basic NIMsUser configurable standard NIMs |
| Protection type: | Coil protection integrated fuse on PDM time lag 10 AOutput surge protection GMOV |
| Insulation between channels: | 500 V for 1 minute |
| Insulation between channels and logic bus: | 1780 V for 1 minute |
| Insulation between logic bus and actuator bus: | 1500 V for 1 minute |
| Surge current: | 20 A 10 ms capacitive |
| Minimum load: | 50 mA |
| Reset: | Manual reset COM fault |
| Product compatibility: | I/O base STBXBA2000Power distribution module STBPDT3100/3105 |
| [Us] rated supply voltage: | 24 V DC |
| Supply: | Power distribution module |
| Current consumption: | 55 mA at 5 V DC for logic bus |
| Marking: | CE |
| Overvoltage category: | II |
| Status LED: | 1 LED (green)module status (RDY)1 LED per channel (green)channel status (OUT1 to OUT2)1 LED (red)module error (ERR) |
| Height: | 18.4 mm |
| Depth: | 70 mm |
| Width: | 128.3 mm |
| Product weight: | 0.13 kg |
In short
Reference STBDRC3210K
Product Name standard digital output kit STB - 24 V 115..230 V AC DC - 2 O - STBDRC3210K
Related Categories
