SCHNEIDER
photo-electric sensor - XUY - ampli for fibre - illumination - 12..24VDC - M8 - XUYAFLCO966S
XUYAFLCO966S
€300.57 Excl. Tax
€360.68 Inc. Tax
Excl. Tax
Excl. Tax
Incl. Tax
Incl. Tax
You save
Supply in process - Average delivery 4/6 weeks
- Technical support and dedicated single point of contact
- Free delivery from 250€ of purchase (Metropolitan France)
- 100% secure payments
Technical informations
| Range of product: | Telemecanique Photoelectric sensors XU |
|---|---|
| Series name: | Application assembly |
| Electronic sensor type: | Photo-electric sensor |
| Product specific application: | Verifying operation of indicator lights on electrical appliancesTesting car headlights on production line |
| Sensor name: | XUY |
| Sensor design: | Fiber design |
| Material: | Plastic |
| Detection system: | Diffuse |
| [Sn] nominal sensing distance: | 0 mm depending on plastic fibres diameter 2.2 mm used |
| Wiring technique: | 4-wire |
| Type of output signal: | Discrete |
| Enclosure material: | Polycarbonate |
|---|---|
| Output type: | Solid state |
| Discrete output function: | 1 NO or 1 NC programmable |
| Electrical connection: | 1 male connector M8, 4 pins |
| Status LED: | Output signal: 1 LED (green)Limit of detection: 1 LED (red)Time delay active: 1 LED (red) |
| Supply circuit type: | DC |
| [Us] rated supply voltage: | 24 V DC with reverse polarity protection |
| Supply voltage limits: | 10...30 V DC |
| Voltage state 0 guaranteed: | |
| Voltage state 1 guaranteed: | > 3 V |
| Switching capacity in mA: | 100 mA (overload and short-circuit protection) |
| Switching frequency: | |
| Maximum voltage drop: | |
| Current consumption: | |
| Time delay range: | 0...5 s adjustment increments delay |
| Maximum delay response: | 100 ms |
| Maximum delay recovery: | 100 ms |
| Setting-up: | With sensitivity adjustment |
| Product weight: | 0.054 kg |
In short
Reference XUYAFLCO966S
Product Name photo-electric sensor - XUY - ampli for fibre - illumination - 12..24VDC - M8 - XUYAFLCO966S
Related Categories
