SCHNEIDER
output interface module - 9.5 mm - solid state - 24..48 V DC - 2 A - ABS2SC01EB
ABS2SC01EB
This product is no longer available. Contact us for a suitable replacement solution tailored to your needs.
Technical informations
| Range of product: | Interface for discrete signals |
|---|---|
| Product or component type: | Slim solid state output interface module |
| Contacts type and composition: | 1 NC |
| [Uc] control circuit voltage: | 24 V |
| Control circuit type: | DC |
| Maximum [In] rated current: | 12 mA |
| Reverse polarity protection: | Control circuit: internalOutput circuit: internal |
| Short-circuit protection: | 3.15 A external fuse fast blow (Ik |
| [Ith] conventional free air thermal current: | 2 A at 40 °C |
| Local signalling: | Green mechanical indicator for position of contacts and 1 green LED control signal state |
| Sale per indivisible quantity: | 5 |
| Width pitch dimension: | 9.5 mm |
| Control circuit voltage limits: | 28.8 V |
|---|---|
| Voltage state 1 guaranteed: | 16.9 V |
| Current state 1 guaranteed: | 7.7 mA |
| Voltage state 0 guaranteed: | 5.6 V |
| Current state 0 guaranteed: | 2 mA |
| [Ue] rated operational voltage: | 5...48 V |
| Output circuit type: | DC |
| Rated operational voltage limits: | |
| [Ie] rated operational current: | 1.5 A DC-12 vertical position, single product conforming to IEC 60947-5-11.5 A DC-13 vertical position, single product conforming to IEC 60947-5-10.6 A DC-14 vertical position, single product conforming to IEC 60947-5-10.6 A DC-14 vertical position, touching product conforming to IEC 60947-5-10.9 A DC-12 vertical position, touching product conforming to IEC 60947-5-10.9 A DC-13 vertical position, touching product conforming to IEC 60947-5-1 |
| Minimum switching current: | 1 mA |
| Maximum residual current: | 1 mA |
| Drop-out voltage: | 1.5 V |
| Response time: | |
| Switching frequency: | |
| [Ui] rated insulation voltage: | 250 V conforming to VDE 0110 group C300 V conforming to IEC 60947-1 |
| Flame retardance: | V0 conforming to UL 94 |
| Cable cross section: | 0.6...2.5 mm², 1 or 2 wires flexible without cable end screw clamp terminal0.27...4 mm², 1 wire rigid0.34...2.5 mm², 1 or 2 wires flexible with cable end |
| Operating position: | Any position |
| Installation category: | II conforming to IEC 60947-1 |
| Mounting support: | Symmetrical DIN railAsymmetrical DIN railCombination rail |
| Product weight: | 0.34 kg |
In short
Reference ABS2SC01EB
Product Name output interface module - 9.5 mm - solid state - 24..48 V DC - 2 A - ABS2SC01EB
Our customers also bought
Related Categories