SCHNEIDER
multifunction phase control relay - RM35TF30SP01
RM35TF30SP01
This product is no longer available. Contact us for a suitable replacement solution tailored to your needs.
Technical informations
| Range of product: | Zelio Control |
|---|---|
| Product or component type: | Modular measurement and control relays |
| Relay type: | Multifunction control relay |
| Product specific application: | For 3-phase supply |
| Relay name: | RM35TF |
| Relay monitored parameters: | Phase sequenceAsymmetryUndervoltage and overvoltage in window modePhase failure detection |
| Time delay type: | Adjustable 0.1...10 s, +/- 10 % of the full scale value |
| Switching capacity in VA: | 1250Â VA |
| Measurement range: | 194...528 V AC |
| Reset time: | 1500Â ms at 480 V |
|---|---|
| Maximum switching voltage: | 250Â V AC250Â V DC |
| Minimum switching current: | 10Â mA at 5 V DC |
| Maximum switching current: | 5Â A AC5Â A DC |
| Supply voltage limits: | 194...528Â V AC, 3 phases |
| Control circuit voltage limits: | - 12 % + 10 % Un |
| Power consumption in VA: | 0...22Â VA at 400 V AC 50 Hz |
| Voltage detection threshold: | |
| Control circuit frequency: | 50...60 Hz +/- 10 % |
| Output contacts: | 2 C/O |
| Nominal output current: | 5Â A |
| Hysteresis: | 2Â % |
| Run-up delay at power-up: | 650Â ms |
| Maximum measuring cycle: | 140Â ms measurement cycle as true rms value |
| Threshold adjustment voltage: | 2...20 % of Un selected-12...-2 % in the range 220 V AC+2...+10 % in the range 480 V AC-20...-2 % in the range 380...480 V AC+2...+20 % in the range 220...440 V AC |
| Voltage range: | 220...480 V phase to phase |
| Adjustment of asymmetry threshold: | 5...15 % of Un selected |
| Repeat accuracy: | 0.3Â % for time delay0.5Â % for input and measurement circuit |
| Measurement error: | 0.05 %/°C with temperature variation |
| Response time: | |
| Marking: | CE |
| Overvoltage category: | III conforming to IEC 60664-1 |
| Insulation resistance: | > 500 MOhm at 500 V DC conforming to IEC 60255-5> 500 MOhm at 500 V DC conforming to IEC 60664-1 |
| [Ui] rated insulation voltage: | 400Â V conforming to IEC 60664-1 |
| Supply frequency: | 50/60 Hz +/- 10 % |
| Operating position: | Any position without derating |
| Connections - terminals: | Screw terminals, 1 x 0.5...1 x 4 mm² (AWG 20...AWG 11) solid without cable endScrew terminals, 2 x 0.5...2 x 2.5 mm² (AWG 20...AWG 14) solid without cable endScrew terminals, 1 x 0.2...1 x 2.5 mm² (AWG 24...AWG 12) flexible with cable endScrew terminals, 2 x 0.2...2 x 1.5 mm² (AWG 24...AWG 16) flexible with cable end |
| Tightening torque: | 0.6...1Â N.m conforming to IEC 60947-1 |
| Housing material: | Self-extinguishing plastic |
| Local signalling: | LED (green) for power ONLED (yellow) for relay ONLED (yellow) for fault |
| Mounting support: | 35 mm symmetrical DIN rail conforming to EN/IEC 60715 |
| Electrical durability: | 100000Â cycles |
| Mechanical durability: | 30000000Â cycles |
| Operating rate: | |
| Utilisation category: | AC-12 conforming to IEC 60947-5-1AC-13 conforming to IEC 60947-5-1AC-14 conforming to IEC 60947-5-1AC-15 conforming to IEC 60947-5-1DC-12 conforming to IEC 60947-5-1DC-13 conforming to IEC 60947-5-1 |
| Safety reliability data: | B10d = 360000MTTFd = 399.5 years |
| Width: | 35Â mm |
| Product weight: | 0.13Â kg |
| Compatibility code: | RM3 |
In short
Reference RM35TF30SP01
Product Name multifunction phase control relay - RM35TF30SP01
Related Categories