SCHNEIDER
modular single phase power meter iEM2150 - 230V - 63A with comm Modbus - A9MEM2150
A9MEM2150
This product is no longer available. Contact us for a suitable replacement solution tailored to your needs.
Technical informations
| Range: | Acti 9 |
|---|---|
| Product name: | Acti 9 iEM2100 |
| Device short name: | IEM2150 |
| Product or component type: | Energy meter |
| Market segment: | Buildings small building cost management: billing: panelboardBuildings medium building cost management: billing: panelboardBuildings large building cost management: billing: panelboardBuildings multi-site cost management: billing: panelboardData center cost management: billing: panelboardHealthcare cost management: billing: panelboardIndustry cost management: billing: panelboardBuildings small building cost management: cost allocation: panelboardBuildings medium building cost management: cost allocation: panelboardBuildings large building cost management: cost allocation: panelboardBuildings multi-site cost management: cost allocation: panelboardData center cost management: cost allocation: panelboardHealthcare cost management: cost allocation: panelboardIndustry cost management: cost allocation: panelboard |
| Poles description: | 1P + N |
|---|---|
| Type of measurement: | Active and reactive energyActive and reactive powerCurrentVoltage |
| Metering type: | Active, reactive, apparent energy (signed, four quadrant) |
| Device application: | Sub billingPartial meter |
| Accuracy class: | Class 1 active energy conforming to IEC 62053-21Class 2 reactive energy conforming to IEC 62053-23 |
| Analogue input type: | Direct input |
| [In] rated current: | 63 A |
| Rated voltage: | 230 V +/- 20 % |
| Network frequency: | 50 Hz60 Hz |
| Frequency measurement range: | 45...65 Hz |
| Technology type: | Electronic |
| Display type: | LCD display |
| Sampling rate: | 32 samples/cycle |
| Measurement current: | 0...63 A |
| Display digits: | 8 |
| Maximum value measured: | 999999.99 kWh |
| Information displayed: | Tariff (1) |
| Communication port protocol: | Modbus RTU at 1.2, 2.4, 4.8, 9.6, 19.2 and 38.4 kbauds even/odd or none - 3 wires, insulation 4000 V |
| Communication port support: | Screw terminals: RS485 |
| Local signalling: | Red LED: accuracy checking 1...1000 p/kWh |
| Number of inputs: | 0 |
| Number of outputs: | 0 |
| [Us] rated supply voltage: | 96...276 V AC 50 Hz |
| Maximum power consumption in VA: | 2 VA |
| Maximum power consumption in W: | 1 W |
| [Uimp] rated impulse withstand voltage: | 6 kV 1.2/50 µs |
| Mounting mode: | Clip-on |
| Mounting support: | DIN rail |
| Connections - terminals: | Power circuit: tunnel type terminals (bottom) 1 1.65...33 mm² cable(s) solidPower circuit: tunnel type terminals (bottom) 1 1.65...33 mm² cable(s) stranded with cable endCommunication: screw clamp terminals (top) 1 1...4 mm² cable(s) solidCommunication: screw clamp terminals (top) 1 1...2.5 mm² cable(s) stranded with cable end |
| Tightening torque: | Power circuit: 2 N.m PZ2 screwdriver Communication: 0.5 N.m3.5 mm |
| Wire stripping length: | Power circuit: 17 mmCommunication: 7 mm |
| Standards: | IEC 62052-31IEC 62053-21IEC 62053-23IEC 62052-11 |
| Product certifications: | CE |
| Compatibility code: | IEM2150 |
In short
Reference A9MEM2150
Product Name modular single phase power meter iEM2150 - 230V - 63A with comm Modbus - A9MEM2150
Range Acti 9
Device function Sous-facturation
Compteur partiel
Compteur partiel
Related Categories