Money back guarantee
Secure payments
Volume discount
0

Welcome

motion servo drive - Lexium 32 - three-phase supply voltage 208/480V - 0.4 kW  - LXM32MU60N4

Excl. Tax: €682.48 Incl. Tax: €682.48

Quick Overview

  • Main
    • range of product : Lexium 32
    • product or component type : Motion servo drive
    • device short name : LXM32M
    • format of the drive : Book
    • network number of phases : Three phase
    • [Us] rated supply voltage : 200...240 V (- 15...10 %)
      380...480 V (- 15...10 %)
    • supply voltage limits : 170...264 V
      323...528 V
    • supply frequency : 50/60 Hz (- 5...5 %)
    • network frequency : 47.5...63 Hz
    • EMC filter : Integrated
    • continuous output current : 1.5 A (f = 8 kHz)
    • output current 3s peak : 6 A for 5 s
    • continuous power : 400 W at 230 V
      800 W at 400 V
    • nominal power : 0.35 kW at 230 V (f = 8 kHz)
      0.4 kW at 400 V (f = 8 kHz)
    • line current : 1.2 A, THDI of 201 % at 480 V, without line choke
      1.9 A, THDI of 106 % at 380 V, with external line choke of 2 mH
      1.6 A, THDI of 116 % at 480 V, with external line choke of 2 mH
      1.8 A, THDI of 187 % at 380 V, without line choke

Details - Motion servo drive - LXM32M

  • Complementary
    • switching frequency : 8 kHz
    • overvoltage category : III
    • leakage current : < 30 mA
    • output voltage : <= power supply voltage
    • electrical isolation : Between power and control
    • type of cable : Single-strand IEC cable (for θ = 50 °C) conductor material: copper 90 °C ,wire insulation material: XLPE/EPR
    • electrical connection : Terminal cable 3 mm² AWG 12 (CN8)
      Terminal cable 5 mm² AWG 10 (CN1)
      Terminal cable 5 mm² AWG 10 (CN10)
    • tightening torque : 0.5 N.m (CN8)
      0.7 N.m (CN1)
      0.7 N.m (CN10)
    • discrete input number : 2 capture
      2 safety
      4 logic
    • discrete input type : Capture (CAP)
      Logic (DI)
      Safety (compliment of STO_A, compliment of STO_B)
    • sampling duration : 0.25 ms
      0.25 ms (DI) for discrete
    • discrete input voltage : 24 V DC for capture
      24 V DC for logic
      24 V DC for safety
    • discrete input logic : Positive (compliment of STO_A, compliment of STO_B) at State 0: < 5 V at State 1: > 15 V conforming to EN/IEC 61131-2 type 1
      Positive (DI) at State 0: > 19 V at State 1: < 9 V conforming to EN/IEC 61131-2 type 1
      Positive or negative (DI) at State 0: < 5 V at State 1: > 15 V conforming to EN/IEC 61131-2 type 1
    • response time : <= 5 ms (compliment of STO_A, compliment of STO_B)
    • discrete output number : 3
    • discrete output type : Logic (DO) 24 V DC
    • discrete output voltage : <= 30 V DC
    • discrete output logic : Positive or negative (DO) conforming to EN/IEC 61131-2
    • contact bounce time : <= 1 ms (compliment of STO_A, compliment of STO_B)
      2 µs (CAP)
      0.25 µs...1.5 ms (DI)
    • braking current : 50 mA
    • response time on output : 250 µs (DO) discrete
    • control signal type : Servo motor encoder feedback
      Pulse train output (PTO) :RS422 (f = <= 500 kHz) (cable length: 100 m)
      Pulse/direction (P/D), A/B, CW/CCW :5 V, 24 V link (open collector) (f = <= 10 kHz) (cable length: 1 m)
      Pulse/direction (P/D), A/B, CW/CCW :5 V, 24 V link (push-pull) (f = <= 200 kHz) (cable length: 10 m)
      Pulse/direction (P/D), A/B, CW/CCW :RS422 (f = <= 1000 kHz) (cable length: 100 m)
    • protection type : Against reverse polarity :inputs signal
      Against short-circuits :outputs signal
    • safety function : STO (safe torque off), integrated
      SS1 (safe stop 1), with separated eSM safety card
      SS2 (safe stop 2), with separated eSM safety card
      SLS (safe limited speed), with separated eSM safety card
      SOS (safe operating stop), with separated eSM safety card
    • safety level : SIL 3 conforming to EN/IEC 61508
      PL = e conforming to ISO 13849-1
    • communication interface : Integrated Modbus
      With separated communication card CANopen
      With separated communication card CANmotion
      With separated communication card Ethernet/IP
      With separated communication card EtherCAT
      With separated communication card Profibus
      With separated communication card DeviceNet
      With separated communication card I/O
    • connector type : RJ45 (labelled CN7) :Modbus
    • physical interface : 2-wire RS485 multidrop Modbus
    • transmission rate : 9600, 19200, 38400 bps for bus length of <= 40 m Modbus
    • number of addresses : 1...247 Modbus
    • status LED : 1 LED (red) servo drive voltage
    • signalling function : Display of faults in 7 segments
    • marking : CE
    • operating position : Vertical +/- 10 degree
    • product compatibility : Servo motor BMH (70 mm, 1 motor stacks)
      Servo motor BSH (55 mm, 1 motor stacks)
      Servo motor BSH (55 mm, 2 motor stacks)
      Servo motor BSH (55 mm, 3 motor stacks)
    • width : 68 mm
    • height : 270 mm
    • depth : 237 mm
    • product weight : 1.8 kg

Additional Information - LXM32M - LXM32MU60N4

Manufacturer Schneider
Plus d'infos
  • Environment
    • electromagnetic compatibility : Conducted EMC at class A group 1 conforming to EN 55011
      Conducted EMC at class A group 2 conforming to EN 55011
      Conducted EMC at environment 2 category C3 conforming to EN/IEC 61800-3
      Conducted EMC at category C2 conforming to EN/IEC 61800-3
      Conducted EMC at environments 1 and 2 conforming to EN/IEC 61800-3
      Electrostatic discharge immunity test at level 3 conforming to EN/IEC 61000-4-2
      Susceptibility to electromagnetic fields at level 3 conforming to EN/IEC 61000-4-3
      1.2/50 µs shock waves immunity test at level 3 conforming to EN/IEC 61000-4-5
      Electrical fast transient/burst immunity test at level 4 conforming to EN/IEC 61000-4-4
      Radiated EMC at class A group 2 conforming to EN 55011
      Radiated EMC at category C3 conforming to EN/IEC 61800-3
    • standards : EN/IEC 61800-3
      EN/IEC 61800-5-1
    • product certifications : RoHS
      CSA
      UL
      TÜV
    • IP degree of protection : IP20 conforming to EN/IEC 60529
      IP20 conforming to EN/IEC 61800-5-1
    • vibration resistance : 1.5 mm peak to peak (f = 3...13 Hz) conforming to EN/IEC 60068-2-6
      1 gn (f = 13...150 Hz) conforming to EN/IEC 60068-2-6
    • shock resistance : 15 gn for 11 ms conforming to EN/IEC 60028-2-27
    • pollution degree : 2 conforming to EN/IEC 61800-5-1
    • environmental characteristic : Classes 3C1 conforming to IEC 60721-3-3
    • relative humidity : Class 3K3 (5 to 85 %) without condensation conforming to IEC 60721-3-3
    • ambient air temperature for operation : 0...50 °C conforming to UL
    • ambient air temperature for storage : -25...70 °C
    • type of cooling : Natural convection
    • operating altitude : <= 1000 m without derating
      > 1000...3000 m with conditions
  • Offer Sustainability
    • Sustainable offer status : Green Premium product
    • RoHS (date code: YYWW) : Compliant  - since  0930  -  Schneider Electric declaration of conformity 
    • REACh :
    • Product environmental profile : Available
    • Product end of life instructions : Available
  • Contractual warranty
    • Warranty period : 18 months
My Cart

You have no items in your shopping cart.