SCHNEIDER
TeSys LC1F - contacteur - 3P - AC-3 440V - 225A - bobine 110Vca - LC1F225F7
LC1F225F7
Obsolete product, here is the proposed substitution for the reference LC1F225F7 : LC1G225EHEN
Technical informations
| Range of product: | TeSys F |
|---|---|
| Range: | TeSys |
| Product name: | TeSys F |
| Product or component type: | Contactor |
| Device short name: | LC1F |
| Contactor application: | Motor controlResistive load |
| Motor power kW: | 100 kW at 1000 V AC 50/60 Hz AC-3110 kW at 380...400 V AC 50/60 Hz AC-3110 kW at 415 V AC 50/60 Hz AC-3110 kW at 440 V AC 50/60 Hz AC-3129 kW at 500 V AC 50/60 Hz AC-3129 kW at 660?690 V AC 50/60 Hz AC-363 kW at 220...230 V AC 50/60 Hz AC-340 kW at 400 V AC 50/60 Hz AC-4 |
| Control circuit type: | AC 40...400 Hz |
| [Uc] control circuit voltage: | 110 V AC 40...400 Hz |
| [Uimp] rated impulse withstand voltage: | 8 kV |
| Overvoltage category: | III |
| [Ith] conventional free air thermal current: | 315 A at |
| Rated breaking capacity: | 1800 A conforming to IEC 60947-4-1 |
| [Icw] rated short-time withstand current: | 1800 A 1000 A 850 A 560 A 440 A |
| Associated fuse rating: | 315 A gG at 250 A aM at |
| Average impedance: | 0.32 mOhm at 50 Hz - Ith 315 A |
| [Ui] rated insulation voltage: | 1000 V conforming to IEC 60947-4-11500 V conforming to VDE 0110 group C |
| Power dissipation per pole: | 16 W AC-332 W AC-1 |
| Mounting support: | Plate |
| Standards: | EN 60947-1EN 60947-4-1IEC 60947-1IEC 60947-4-1JEM 1038 |
| Product certifications: | BVCCCCSADNVGLRMRoSULLROS |
| Connections - terminals: | Control circuit |
| Tightening torque: | Power circuit |
| Operating time: | 20...35 ms closing7...15 ms opening |
| Mechanical durability: | 10 Mcycles |
| Operating rate: | 2400 cyc/h at |
| Utilisation category: | AC-1AC-3AC-4 |
|---|---|
| Poles description: | 3P |
| Pole contact composition: | 3 NO |
| [Ue] rated operational voltage: | |
| [Ie] rated operational current: | 315 A (225 A ( |
| Control circuit voltage limits: | 0.35...0.55 Uc at 55 °C drop-out 50/60 Hz0.85...1.1 Uc at 55 °C operational 50/60 Hz |
| Inrush power in VA: | 805 VA at 20 °C (cos ? 0.3) 50 Hz970 VA at 20 °C (cos ? 0.3) 60 Hz |
| Hold-in power consumption in VA: | 55 VA at 20 °C (cos ? 0.3) 50 Hz66 VA at 20 °C (cos ? 0.3) 60 Hz |
| Heat dissipation: | 18...24 W |
| Motor power range AC-3: | 110...220 kW 380...440 V 3 phases55...100 kW 200...240 V 3 phases110...220 kW 480...500 V 3 phases |
| Motor starter type: | Direct on-line contactor |
| Contactor coil voltage: | 110 V AC |
In short
Reference LC1F225F7
Product Name TeSys LC1F - contacteur - 3P - AC-3 440V - 225A - bobine 110Vca - LC1F225F7
Range TeSys
Related Categories