SCHNEIDER
incremental encoder Ø 58 - through shaft 14 mm - 5000 points - push-pull - XCC1514TS50Y
XCC1514TS50Y
This product is no longer available. Contact us for a suitable replacement solution tailored to your needs.
Technical informations
| Range of product: | OsiSense XCC |
|---|---|
| Encoder type: | Incremental encoder |
| Encoder name: | XCC |
| Product specific application: | - |
| Diameter: | 58 mm |
| Shaft diameter: | 14 mm |
| Shaft type: | Through shaft |
| Resolution: | 5000 points |
| Output stage: | Type Y |
| Type of output stage: | Driver push-pull |
| Electrical connection: | 1 male connector M23 radial 12 pins |
| [Us] rated supply voltage: | 5...30 V DC |
| Enclosure material: | Zamak |
| Shaft tolerance: | H7 |
|---|---|
| Residual ripple: | 500 mV |
| Maximum revolution speed: | 6000 rpm |
| Shaft moment of inertia: | 22 g.cm² |
| Torque value: | 0.006 N.m |
| Maximum load: | 2 daN axial5 daN radial |
| Output frequency: | 300 kHz |
| Number of channels: | 3 |
| Current consumption: | 0...75 mA no-load |
| Protection type: | Short-circuit protectionReverse polarity protection |
| Maximum output current: | 40 mA |
| Output level: | Low level: 0.5 V maximum 20 mAHigh level: V supply - 2.5 V minimum 20 mA |
| Surge withstand: | 1 kV, level 2 conforming to IEC 61000-4-5 |
| Base material: | Aluminium |
| Shaft material: | Stainless steel |
| Type of ball bearings: | 6803ZZ |
| Product weight: | 0.435 kg |
In short
Reference XCC1514TS50Y
Product Name incremental encoder Ø 58 - through shaft 14 mm - 5000 points - push-pull - XCC1514TS50Y