Money back guarantee
Secure payments
Volume discount
0

Welcome

variable speed drive ATV312 - 7.5kW - 18kVA - 269W - 380..500 V- 3-phase supply  - ATV312HU75N4

Excl. Tax: €756.68 Incl. Tax: €756.68

Quick Overview

  • Main
    • range of product : Altivar 312
    • product or component type : Variable speed drive
    • product destination : Asynchronous motors
    • product specific application : Simple machine
    • assembly style : With heat sink
    • component name : ATV312
    • motor power kW : 7.5 kW
    • motor power hp : 10 hp
    • [Us] rated supply voltage : 380...500 V (- 15...10 %)
    • supply frequency : 50...60 Hz (- 5...5 %)
    • network number of phases : 3 phases
    • line current : 27.7 A for 380 V, 22 kA
      21 A for 500 V
    • EMC filter : Integrated
    • apparent power : 18 kVA
    • maximum transient current : 25.5 A for 60 s
    • power dissipation in W : 269 W at nominal load
    • speed range : 1...50
    • asynchronous motor control profile : Sensorless flux vector control with PWM type motor control signal
      Factory set : constant torque
    • electrical connection : L1, L2, L3, U, V, W, PA, PB, PA/+, PC/- terminal 16 mm² AWG 6
      Al1, Al2, Al3, AOV, AOC, R1A, R1B, R1C, R2A, R2B, LI1...LI6 terminal 2.5 mm² AWG 14
    • supply : Internal supply for logic inputs at 19...30 V, <= 100 mA for overload and short-circuit protection
      Internal supply for reference potentiometer (2.2 to 10 kOhm) at 10...10.8 V, <= 10 mA for overload and short-circuit protection
    • communication port protocol : CANopen
      Modbus
    • IP degree of protection : IP20 on upper part without cover plate
      IP21 on connection terminals
      IP31 on upper part
      IP41 on upper part
    • option card : CANopen daisy chain communication card
      DeviceNet communication card
      Fipio communication card
      Modbus TCP communication card
      Profibus DP communication card

Details - Variable speed drive

  • Complementary
    • supply voltage limits : 323...550 V
    • network frequency : 47.5...63 Hz
    • prospective line Isc : 22 kA
    • continuous output current : 17 A at 4 kHz
    • output frequency : 0...500 kHz
    • nominal switching frequency : 4 kHz
    • switching frequency : 2...16 kHz adjustable
    • transient overtorque : 170...200 % of nominal motor torque
    • braking torque : 100 % with braking resistor continuously
      150 % without braking resistor
      150 % with braking resistor for 60 s
    • regulation loop : Frequency PI regulator
    • motor slip compensation : Adjustable
      Suppressable
      Automatic whatever the load
    • output voltage : <= power supply voltage
    • tightening torque : 2.5 N.m L1, L2, L3, U, V, W, PA, PB, PA/+, PC/-
      0.6 N.m Al1, Al2, Al3, AOV, AOC, R1A, R1B, R1C, R2A, R2B, LI1...LI6
    • insulation : Electrical between power and control
    • analogue input number : 3
    • analogue input type : AI1 configurable voltage 0...10 V, input voltage 30 V max, impedance 30000 Ohm
      AI2 configurable voltage +/- 10 V, input voltage 30 V max, impedance 30000 Ohm
      AI3 configurable current 0...20 mA, impedance 250 Ohm
    • sampling duration : AI1, AI2, AI3 8 ms for analog
      LI1...LI6 4 ms for discrete
    • response time : AOV, AOC 8 ms for analog
      R1A, R1B, R1C, R2A, R2B 8 ms for discrete
    • linearity error : +/- 0.2 % for output
    • analogue output number : 1
    • analogue output type : AOC configurable current 0...20 mA, impedance 800 Ohm, resolution 8 bits
      AOV configurable voltage 0...10 V, impedance 470 Ohm, resolution 8 bits
    • discrete input logic : (LI1...LI4) logic input not wired, < 13 V (state 1)
      (LI1...LI6) negative logic (source), > 19 V (state 0)
      (LI1...LI6) positive logic (source), < 5 V (state 0), > 11 V (state 1)
    • discrete output number : 2
    • discrete output type : (R1A, R1B, R1C) configurable relay logic 1 NO + 1 NC, electrical durability 100000 cycles
      (R2A, R2B) configurable relay logic NC, electrical durability 100000 cycles
    • minimum switching current : R1-R2 10 mA at 5 V DC
    • maximum switching current : R1-R2 on inductive load, 2 A at 250 V AC, (cos phi = 0.4, and L/R = 7 ms)
      R1-R2 on inductive load, 2 A at 30 V DC, (cos phi = 0.4, and L/R = 7 ms)
      R1-R2 on resistive load, 5 A at 250 V AC, (cos phi = 1, and L/R = 0 ms)
      R1-R2 on resistive load, 5 A at 30 V DC, (cos phi = 1, and L/R = 0 ms)
    • discrete input number : 6
    • discrete input type : (LI1...LI6) programmable, 24 V 0...100 mA with PLC, impedance 3500 Ohm
    • acceleration and deceleration ramps : Linear adjustable separately from 0.1 to 999.9 s
      S, U or customized
    • braking to standstill : By DC injection
    • protection type : Input phase breaks drive
      Line supply overvoltage and undervoltage safety circuits drive
      Line supply phase loss safety function, for three phases supply drive
      Motor phase breaks drive
      Overcurrent between output phases and earth (on power up only) drive
      Overheating protection drive
      Short-circuit between motor phases drive
      Thermal protection motor
    • insulation resistance : >= 500 mOhm at 500 V DC for 1 minute
    • local signalling : 1 LED red for drive voltage
      Four 7-segment display units for CANopen bus status
    • time constant : 5 ms for reference change
    • frequency resolution : Analog input 0.1...100 Hz
      Display unit 0.1 Hz
    • connector type : 1 RJ45 Modbus/CANopen
    • physical interface : RS485 multidrop serial link
    • transmission frame : RTU
    • transmission rate : 10, 20, 50, 125, 250, 500 kbps or 1 Mbps CANopen
      4800, 9600 or 19200 bps Modbus
    • number of addresses : 1...247 Modbus
      1...127 CANopen
    • number of drive : 127 CANopen
      31 Modbus
    • marking : CE
    • operating position : Vertical +/- 10 degree
    • outer dimension : 232 x 180 x 170 mm
      300 x 210 x 170 mm
      405 x 234 x 268 mm
    • height : 232 mm
    • width : 180 mm
    • depth : 172 mm
    • product weight : 6.5 kg

Additional Information - ATV312HU75N4

Manufacturer Schneider
Code EAN 3606480077692
Plus d'infos
  • Environment
    • dielectric strength : 2410 V DC between earth and power terminals
      3400 V AC between control and power terminals
    • electromagnetic compatibility : Electrical fast transient/burst immunity test conforming to IEC 61000-4-4 level 4
      Electrostatic discharge immunity test conforming to IEC 61000-4-2 level 3
      Radiated radio-frequency electromagnetic field immunity test conforming to IEC 61000-4-3 level 3
      1.2/50 µs - 8/20 µs surge immunity test conforming to IEC 61000-4-5 level 3
    • standards : IEC 61800-5-1
      IEC 61800-3
    • product certifications : GOST
      UL
      CSA
      NOM
      C-Tick
      DNV
    • pollution degree : 2
    • protective treatment : TC
    • vibration resistance : 1.5 mm (f = 3...13 Hz) conforming to EN/IEC 60068-2-6
      1 gn (f = 13...150 Hz) conforming to EN/IEC 60068-2-6
    • shock resistance : 15 gn for 11 ms conforming to EN/IEC 60068-2-27
    • relative humidity : 5...95 % without condensation conforming to IEC 60068-2-3
      5...95 % without dripping water conforming to IEC 60068-2-3
    • ambient air temperature for storage : -25...70 °C
    • ambient air temperature for operation : -10...50 °C without derating with protective cover on top of the drive
      -10...60 °C with derating factor without protective cover on top of the drive
    • operating altitude : <= 1000 m without derating
      1000...3000 m with current derating 1 % per 100 m
  • Offer Sustainability
    • Sustainable offer status : Green Premium product
    • RoHS (date code: YYWW) : Compliant  - since  0913  -  Schneider Electric declaration of conformity 
    • REACh : Reference contains SVHC above the threshold  -  Go to CaP for more details 
    • Product environmental profile : Available
    • Product end of life instructions : Available
  • Contractual warranty
    • Warranty period : 18 months
My Cart

You have no items in your shopping cart.