SCHNEIDER
ATV312 ALTIVAR 0,75KW 500V TRI 1,8KVA 500V TR - ATV312H075N4
ATV312H075N4
Obsolete product, here is the proposed substitution for the reference ATV312H075N4 : ATV320U07N4C
Technical informations
| Range of product: | Altivar 312 |
|---|---|
| Product or component type: | Variable speed drive |
| Product destination: | Asynchronous motors |
| Product specific application: | Simple machine |
| Assembly style: | With heat sink |
| Component name: | ATV312 |
| Motor power kW: | 0.75 kW |
| Motor power hp: | 1 hp |
| [Us] rated supply voltage: | 380...500 V (- 15...10 %) |
| Supply frequency: | 50...60 Hz (- 5...5 %) |
| Network number of phases: | 3 phases |
| Line current: | 3.6 A for 380 V, 5 kA2.7 A for 500 V |
| EMC filter: | Integrated |
| Apparent power: | 2.4 kVA |
| Maximum transient current: | 3.5 A for 60 s |
| Power dissipation in W: | 41 W at nominal load |
| Speed range: | 1...50 |
| Asynchronous motor control profile: | Sensorless flux vector control with PWM type motor control signalFactory set |
| Electrical connection: | L1, L2, L3, U, V, W, PA, PB, PA/+, PC/- terminal 5 mm² AWG 10Al1, Al2, Al3, AOV, AOC, R1A, R1B, R1C, R2A, R2B, LI1...LI6 terminal 2.5 mm² AWG 14 |
| Supply: | Internal supply for logic inputs at 19...30 V, Internal supply for reference potentiometer (2.2 to 10 kOhm) at 10...10.8 V, |
| Communication port protocol: | CANopenModbus |
| IP degree of protection: | IP20 on upper part without cover plateIP21 on connection terminalsIP31 on upper partIP41 on upper part |
| Option card: | CANopen daisy chain communication cardDeviceNet communication cardFipio communication cardModbus TCP communication cardProfibus DP communication card |
| Supply voltage limits: | 323...550 V |
|---|---|
| Network frequency: | 47.5...63 Hz |
| Prospective line Isc: | 5 kA |
| Continuous output current: | 2.3 A at 4 kHz |
| Output frequency: | 0...500 kHz |
| Nominal switching frequency: | 4 kHz |
| Switching frequency: | 2...16 kHz adjustable |
| Transient overtorque: | 170...200 % of nominal motor torque |
| Braking torque: | 100 % with braking resistor continuously150 % without braking resistor150 % with braking resistor for 60 s |
| Regulation loop: | Frequency PI regulator |
| Motor slip compensation: | AdjustableSuppressableAutomatic whatever the load |
| Output voltage: | |
| Tightening torque: | 1.2 N.m L1, L2, L3, U, V, W, PA, PB, PA/+, PC/-0.6 N.m Al1, Al2, Al3, AOV, AOC, R1A, R1B, R1C, R2A, R2B, LI1...LI6 |
| Insulation: | Electrical between power and control |
| Analogue input number: | 3 |
| Analogue input type: | AI1 configurable voltage 0...10 V, input voltage 30 V max, impedance 30000 OhmAI2 configurable voltage +/- 10 V, input voltage 30 V max, impedance 30000 OhmAI3 configurable current 0...20 mA, impedance 250 Ohm |
| Sampling duration: | AI1, AI2, AI3 8 ms for analogLI1...LI6 4 ms for discrete |
| Response time: | AOV, AOC 8 ms for analogR1A, R1B, R1C, R2A, R2B 8 ms for discrete |
| Linearity error: | +/- 0.2 % for output |
| Analogue output number: | 1 |
| Analogue output type: | AOC configurable current 0...20 mA, impedance 800 Ohm, resolution 8 bitsAOV configurable voltage 0...10 V, impedance 470 Ohm, resolution 8 bits |
| Discrete input logic: | (LI1...LI4) logic input not wired, (LI1...LI6) negative logic (source), > 19 V (state 0)(LI1...LI6) positive logic (source), 11 V (state 1) |
| Discrete output number: | 2 |
| Discrete output type: | (R1A, R1B, R1C) configurable relay logic 1 NO + 1 NC, electrical durability 100000 cycles(R2A, R2B) configurable relay logic NC, electrical durability 100000 cycles |
| Minimum switching current: | R1-R2 10 mA at 5 V DC |
| Maximum switching current: | R1-R2 on inductive load, 2 A at 250 V AC, (cos phi = 0.4, and L/R = 7 ms)R1-R2 on inductive load, 2 A at 30 V DC, (cos phi = 0.4, and L/R = 7 ms)R1-R2 on resistive load, 5 A at 250 V AC, (cos phi = 1, and L/R = 0 ms)R1-R2 on resistive load, 5 A at 30 V DC, (cos phi = 1, and L/R = 0 ms) |
| Discrete input number: | 6 |
| Discrete input type: | (LI1...LI6) programmable, 24 V 0...100 mA with PLC, impedance 3500 Ohm |
| Acceleration and deceleration ramps: | S, U or customizedLinear adjustable separately from 0.1 to 999.9 s |
| Braking to standstill: | By DC injection |
| Protection type: | Input phase breaks driveLine supply overvoltage and undervoltage safety circuits driveLine supply phase loss safety function, for three phases supply driveMotor phase breaks driveOvercurrent between output phases and earth (on power up only) driveOverheating protection driveShort-circuit between motor phases driveThermal protection motor |
| Insulation resistance: | >= 500 mOhm at 500 V DC for 1 minute |
| Local signalling: | 1 LED red for drive voltageFour 7-segment display units for CANopen bus status |
| Time constant: | 5 ms for reference change |
| Frequency resolution: | Analog input 0.1...100 HzDisplay unit 0.1 Hz |
| Connector type: | 1 RJ45 Modbus/CANopen |
| Physical interface: | RS485 multidrop serial link |
| Transmission frame: | RTU |
| Transmission rate: | 10, 20, 50, 125, 250, 500 kbps or 1 Mbps CANopen4800, 9600 or 19200 bps Modbus |
| Number of addresses: | 1...247 Modbus1...127 CANopen |
| Number of drive: | 127 CANopen31 Modbus |
| Marking: | CE |
| Operating position: | Vertical +/- 10 degree |
| Height: | 143 mm |
| Width: | 107 mm |
| Depth: | 152 mm |
| Product weight: | 1.8 kg |
In short
Reference ATV312H075N4
Product Name ATV312 ALTIVAR 0,75KW 500V TRI 1,8KVA 500V TR - ATV312H075N4
Related Categories