Money back guarantee
Secure payments
Volume discount
0

Welcome

Acti9 Smartlink - Modbus RS485 slave - smart communication I/O module  - A9XMSB11

Special Price: €211.94 Excl. Tax €211.94 Incl. Tax

Regular Price: €500.31 Incl. Tax

Quick Overview - Acti 9 Smartlink - A9XMSB11

  • Main
    • range : Acti 9
    • product name : Acti 9 Smartlink
    • product or component type : Smart communication module
    • device short name : Smartlink SI B Modbus
    • device application : Breaker status monitoring
      Basic energy metering E
      Load control
    • connected auxiliaries : Up to 7
      More than 7
    • group of channels : 1 group of 11 digital channels
    • supply current : 1.5 A
    • [Us] rated supply voltage : 24 V DC +/- 20 %
    • mounting location : Between 2 horizontal DIN rails
    • product compatibility : Pulse output meter
      Digital input and output
    • communication service : Modbus slave RS485
    • web server : BMS controller compatible

Details - Smart communication module - Smartlink SI B Modbus

  • Complementary
    • application specific I/O : Pulse totalising counter
      Pulse converter
    • protection type : Short-circuit protection for digital output
      Overvoltage at <= 33 V DC for digital output
      Against reverse polarity for auxiliary supply
      Against reverse polarity for input
    • immunity to microbreaks : 10 ms
    • reset : Factory reset on front face
    • input/output type : 2 inputs + 1 output per digital channel
    • input type : Current sink for digital input, 24 V DC +/- 20 % at 2.5 µA
    • maximum permanent current : 5 µA
      5 µA for digital input
    • electronic filtering time : 1 ms for digital input
    • output type : Logic current source at 24 V DC, 100 mA
    • voltage drop : < 1 V digital output
    • inrush current : 0.5 A for digital output
      3 A for power supply
    • leakage current : 0.1 mA for digital output
    • local signalling : 1 LED yellow color for communication
      1 LED green, orange and red color for status
    • type of setting : Modbus address 01...99 for address encoders
      Reset for address encoders
      Reset for plug in, plug out the auxiliary supply
    • mounting position : Horizontal
      Vertical
    • mounting support : DIN rail
    • colour : White (RAL 9003)
    • location of connection : Front
    • connections - terminals : Plug-in connector qty: 1 for supply circuit
      Plug-in connector qty: 1 for communication bus
      Spring-loaded terminal Ti24 qty: 11 for digital input/output, ordered separately
    • clamping connection capacity : 1 x 0.5...1 x 1.5 mm², flexible with cable end for control
      1 x 0.5...1 x 1.5 mm², flexible without cable end for control
      1 x 0.5...1 x 1.5 mm², rigid with cable end for control
      1 x 0.5...1 x 1.5 mm², rigid without cable end for control
      2 x 0.2...2 x 1.5 mm², flexible with cable end for supply circuit
      2 x 0.2...2 x 1.5 mm², flexible without cable end for supply circuit
      2 x 0.2...2 x 1.5 mm², rigid with cable end for supply circuit
      2 x 0.2...2 x 1.5 mm², rigid without cable end for supply circuit
      2 x 0.25 mm² for twisted shielded pairs cable, flexible with cable end for communication bus
      2 x 0.25 mm² for twisted shielded pairs cable, flexible without cable end for communication bus
      2 x 0.25 mm² for twisted shielded pairs cable, rigid with cable end for communication bus
      2 x 0.25 mm² for twisted shielded pairs cable, rigid without cable end for communication bus
    • wire stripping length : 7 mm for supply circuit
      10 mm for control
      7 mm for communication bus
    • communication network type : RS485, Modbus RTU, slave with connector SUB-D 9 at 9.6...19.2 kbauds
    • 9 mm pitches : 0 modules useful on Din rail
    • height : 23 mm
    • width : 359 mm
    • depth : 40 mm
    • range compatibility : Multi 9 C60
      Acti 9 iC60
      Acti 9 iID
      Acti 9 iSW-NA
      Clario iDPN Vigi
      Librio C40
      ProDis DT40
      ProDis DT60
      Acti 9 I-NA
      ProDis ITG40
      Clario iDPN
      Linergy Linergy FM
      Acti 9 iOF+SD 24
      Acti 9 iACT24
      Acti 9 iATL24
      Acti 9 iCT (auxiliary)
      Acti 9 iTL (auxiliary)
      Acti 9 RCA iC60 Ti24 (connector)
      Acti 9 Reflex iC60 Ti24 (connector)
      Powerlogic (pulse output meter)
    • commissioning interface : Web page
      Acti 9 Smart test
    • web services : Web page

Additional Information - Smartlink SI B Modbus - Acti 9 - A9XMSB11

Manufacturer Schneider
Code EAN 3606480430602
Plus d'infos
  • Environment
    • pollution degree : 3
    • electromagnetic compatibility : Resistance to electrostatic discharge at 8 kV at air discharge conforming to IEC 61000-4-2
      Resistance to electrostatic discharge at 4 kV at contact discharge conforming to IEC 61000-4-2
      Resistance to radiated electromagnetic fields at 10 V/m at 80 MHz...3 GHz conforming to IEC 61000-4-3
      Resistance to fast transient at 2 kV at 5...100 kHz for power supply conforming to IEC 61000-4-4
      Resistance to fast transient at 1 kV for input/output conforming to IEC 61000-4-4
      Resistance to fast transient at 1 kV for communication bus conforming to IEC 61000-4-4
      Conducted EMC at 10 V at 0.15...80 MHz conforming to IEC 61000-4-6
      Immunity to magnetic fields at network frequency at 30 A/m conforming to IEC 61000-4-8
    • tropicalisation : 2
    • relative humidity : 90 % at 40 °C
    • operating altitude : 2000 m
    • ambient air temperature for operation : -25...60 °C
    • ambient air temperature for storage : -40...85 °C
    • standards : EN/IEC 61131-2
      EN/IEC 62053-31
  • Offer Sustainability
    • Sustainable offer status : Green Premium product
    • RoHS (date code: YYWW) : Compliant  - since  1201  -  Schneider Electric declaration of conformity 
    • REACh :
    • Product environmental profile : Available
    • Product end of life instructions : Available
  • Contractual warranty
    • Warranty period : 18 months
My Cart

You have no items in your shopping cart.