SCHNEIDER
DT40 - circuit breaker - DT40N - 3P + N - 32A - C curve - A9N21409
A9N21409
Obsolete product, here is the list of products that can replace the reference A9N21409 :A9P24732 A9PA4732
Technical informations
Range of product: | ProDis |
---|---|
Range: | Prodis |
Product name: | DT40 |
Product or component type: | Miniature circuit-breaker |
Device short name: | DT40N |
Device application: | Distribution |
Poles description: | 3P + N |
Number of protected poles: | 3 |
Neutral position: | Left |
[In] rated current: | 32 A |
Network type: | AC |
Trip unit technology: | Thermal-magnetic |
Curve code: | C |
Breaking capacity code: | N |
Breaking capacity: | 6000 A Icn at 400 V AC 50 Hz conforming to EN/IEC 60898-110 kA Icu at 400...415 V AC 50 Hz conforming to IEC 60947-2 |
Suitability for isolation: | Yes |
Quality labels: | NF |
Network frequency: | 50 Hz |
---|---|
[Ue] rated operational voltage: | 230 V AC 50 Hz between phase and neutral400 V AC 50 Hz between phases |
Magnetic tripping limit: | 5...10 x In |
[Ics] rated service breaking capacity: | 6000 A 100 % x Icn at 400 V AC 50 Hz conforming to EN/IEC 60898-17.5 kA 75 % x Icu at 400 V AC 50 Hz conforming to IEC 60947-2 |
Limitation class: | 3 conforming to EN/IEC 60898-1 |
[Ui] rated insulation voltage: | 400 V AC 50 Hz |
[Uimp] rated impulse withstand voltage: | 4 kV conforming to IEC 60947-2 |
Contact position indicator: | Yes |
Control type: | Toggle |
Local signalling: | ON/OFF indication |
Mounting mode: | Clip-on |
Mounting support: | DIN rail |
Comb busbar and distribution block compatibility: | ProDis |
9 mm pitches: | 6 |
Height: | 81 mm |
Width: | 54 mm |
Depth: | 78 mm |
Product weight: | 322 g |
Colour: | White |
Mechanical durability: | 20000 cycles |
Electrical durability: | 10000 cycles |
Locking options description: | Padlocking device |
Connections - terminals: | Tunnel type terminals downstream 0.33...10 mm² flexibleTunnel type terminals downstream 0.75...16 mm² rigidTunnel type terminals upstream 0.33...10 mm² flexibleTunnel type terminals upstream 0.75...16 mm² rigid |
Wire stripping length: | 13 mm |
Tightening torque: | 2 N.m |
Earth-leakage protection: | Separate block |
Compatibility code: | DT40 |
Standards: | EN/IEC 60898-1EN/IEC 60947-2 |
---|---|
IP degree of protection: | IP20 conforming to IEC 60529 |
Pollution degree: | 3 conforming to IEC 60947-2 |
Tropicalisation: | 2 conforming to IEC 60068-1 |
Relative humidity: | 95 % at 55 °C |
Operating altitude: | 2000 m |
Ambient air temperature for operation: | -25...70 °C |
Ambient air temperature for storage: | -40...70 °C |
Sustainable offer status: | Green Premium productREACh Regulation |
Code EAN: | 3606480382093 |
---|---|
Contexte: | > Voir la présentation de l'offre DT40K Les disjoncteurs DT40 et DT60 Utilisation : Courbe C : - applications générales - commande et protection contre les surintensités de circuits - les déclencheurs magnétiques agissent entre 5 et 10 In Courbe B : - commande et protection contre les surintensités de circuits avec protection des personnes en régimes IT et TN pour des grandes longueurs de câbles - les déclencheurs magnétiques agissent entre 3 et 5 In Courbe D : - commande et protection de circuits dans toutes les installations présentant de forts courants d'appel - les déclencheurs magnétiques agissent entre 10 et 14 In.ProDis, le système de répartition et d'appareillage modulaire Schneider Electric repousse les limites de l'installation en tableaux. De la conception du tableau à sa maintenance, ProDis multiplie les solutions pour réaliser des combinaisons faciles d'appareils, une installation rapide, toute une palette de solutions. Il est désormais facile d'installer des appareils de nature différente, protection et contrôle commande, sous un même peigne : c'est le mixage. Il favorise une disposition logique du tableau en unités fonctionnelles La protection différentielle est disponible en 18 mm et en produit séparé. Les blocs Vigi peuvent donc être associés à n'importe quel disjoncteur de la gamme DT40, ce qui offre un maximum de liberté dans le choix des solutions. |
Substitution_texte: | Obsolete product, here is the list of products that can replace the reference A9N21409 : |
Brief
Reference A9N21409
Product Name DT40 - circuit breaker - DT40N - 3P + N - 32A - C curve - A9N21409
Range Prodis
Device function Distribution
Our customers also bought
Recently Viewed Products
Related Categories