HAGER

25A, 2P, 230V Day-Night power contactor - ETC225

Name: 25A, 2P, 230V Day-Night power contactor - ETC225
SKU: HAGETC225
Price: 32.69 EUR
Availability: InStock

HAGETC225

€27.24 Excl. Tax

€32.69 Inc. Tax

In stock more than 100 units – Dispatched within 24/48h

Buy 6 for
€29.42 €24.52
each and save 10%

Technical support and dedicated single point of contact
Free delivery from 250€ of purchase (Metropolitan France)
100% secure payments

In short
Features
Details
Return
We recommend

Technical informations

The Hager ETC225 contactor features a manual control located on the front face of the device. This mechanism ensures easy management of the "permanent off / automatic mode / forced on" settings.

Architecture	Control type: Day/Night
Model	Number of modules: 1
Main Electrical Characteristics	Rated operational voltage (Ue): 230 V Rated frequency: 50 Hz
Voltage	Rated insulation voltage: 250 V Control circuit voltage (DC): 0 V Control circuit voltage (AC): 230 V Rated impulse withstand voltage: 4 kV
Current Ratings	Rated nominal current: 25A Thermal current in free air: 25A Rated operational current in AC7 category A: 25A Rated operational current in AC7 category B: 8.5A
Dimensions	Installed product depth: 64 mm Installed product height: 83 mm Installed product width: 17.85 mm
Power Consumption	Inrush power consumption: 10.7 VA Holding power consumption: 2.9 VA Total dissipated power under IN: 5.9 W Dissipated power per contact: 1.5 W Dissipated power by the control: 2.9 W Operating power at 230V in AC7 category A: 4.6 kW Operating power at 230V in AC7 category B: 880 W
Response Time	Opening response time: 15 ms Closing response time: 25 ms
Endurance	Electrical endurance (number of cycles): 30,000 Mechanical endurance (number of operations): 100,000
Fluorescent Lamp Management	Max. power with parallel-compensated fluorescent tubes: 810 VA Duo-compensated fluorescent lamps: 1990 VA Max. fluorescent lamp load: 950 VA
Incandescent Lamp Management	Max. power with incandescent lamps: 1900 W
Installation & Mounting	Tightening torque: 1.2 Nm
Connection	Flexible cable connection capacity: 1 - 6 mm² Rigid cable connection capacity: 1 - 10 mm² Contact type: 2F Connection type: Screw terminal Rigid cable connection capacity for control: 1 - 10 mm²
Equipment	Accessorizable: Yes
Usage	Local/manual control: Yes
Standards	European WEEE directive compliant
Safety	IP protection rating: IP2X
Operating Conditions	Operating temperature: -10…50 °C Storage/transport temperature: -40…80 °C